A New Design for Wood Stoves Based on Numerical Analysis and Experimental Research
Open Access
Abstract
This work proposes a comprehensive approach to modifying the design of wood stoves with a heating power up to 20 kW, including design works, simulations, and experimental research. The work is carried out in two stages. In the first part, a numerical model is proposed of the fireplace insert including fluid flow, the chemical combustion reaction, and heat exchange (FLUENT software is applied to solve the problem). The results of the simulation were compared with the experiment carried out on the test bench. A comparison of the experimental and numerical results was made for the temperature distribution along with the concentration of CO, CO2, and O2. Construction changes were proposed in the second stage, together with numerical simulations whose goal was an increase in the efficiency of the heating devices. The results obtained show that the average temperature in the chimney flue, which has a low value that is a determinant of the higher efficiency of the heating devices, was reduced relative to the initial design of the fireplace intake by 11%–16% in all cases. The retrofit enhanced stable heat release from the wood stove, which increased the efficiency and reduced the harmful components of combustion.Keywords
Funding Information
- Narodowe Centrum Badań i Rozwoju (POIG.01.04.00-14-351/13)
This publication has 8 references indexed in Scilit:
- Coordinated Energy Management for Micro Energy Systems Considering Carbon Emissions Using Multi-Objective OptimizationEnergies, 2019
- Multi-Criteria and Life Cycle Assessment of Wood-Based Bioenergy Alternatives for Residential Heating: A Sustainability AnalysisEnergies, 2019
- Experimental Investigations of Innovative Biomass Energy Harnessing SolutionsEnergies, 2018
- Wood stove combustion air retrofits: A low cost way to increase energy savings in dwellingsEnergy and Buildings, 2018
- Study of clean combustion of wood in a stove-fireplace with accumulationJournal of the Energy Institute, 2017
- Predicting NOx Emissions from Wood Stoves using Detailed Chemistry and Computational Fluid DynamicsEnergy Procedia, 2015
- Effect of excess air on the optimization of heating appliances for biomass combustionExperimental Thermal and Fluid Science, 2008
- Numerical and experimental investigations to lower environmental impact of an open fireplaceExperimental Thermal and Fluid Science, 2007