3-D Printable Synthetic Metasurface to Realize 2-D Beam-Steering Antenna
Open Access
- 10 May 2023
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Antennas and Propagation
- Vol. 4, 506-519
Abstract
This article presents highly radio-frequency (RF) transparent phase gradient synthetic metasurfaces made of sub-wavelength-sized 3D printable meta-atoms with tailored permittivity that cannot be achieved with off-the-shelf, commercially available materials. The synthesized meta-atoms design uses one dielectric block of PREPERM® ABS 1000 material with air and metallic inclusions to make low-and high-permittivity materials. The inclusions’ size and height are varied to achieve a complete phase range from 0 to 360∘, while maintaining transmission magnitudes greater than -3.0 dB. A two-dimensional array of meta-atoms forms a metasurface, which can be used for phase-shifting structures. Such metasurfaces can manipulate RF waves by introducing progressive phase delay into array elements. The proposed meta-atoms are employed to create highly RF transparent phase-gradient metal-dielectric composite metasurfaces (MDCMs) operating at 11 GHz. These MDCMs can be implemented through 3D printed technology using low-cost thermoplastics or polymers with composite filaments and minimal human intervention. A pair of MDCMs are combined with an array of microstrip patches to demonstrate 2D beam steering functionality numerically. The antenna system provides a peak directivity of 19.9 dBi with a maximum conical scanning angle of 114∘ and a directivity variation of less than 3 dB.Keywords
Funding Information
- The Post Thesis Scholarship, University of Technology Sydney
- Australian Research Council Discovery Grant
- EPSRC (“SYMETA” EP/N010493/1, “ANISAT” EP/S030301/1)
This publication has 32 references indexed in Scilit:
- Steering the Beam of Medium-to-High Gain Antennas Using Near-Field Phase TransformationIEEE Transactions on Antennas and Propagation, 2017
- Advances in Full Control of Electromagnetic Waves with MetasurfacesAdvanced Optical Materials, 2016
- FLAT LENS DESIGN USING ARTIFICIALLY ENGINEERED MATERIALSProgress in Electromagnetics Research C, 2016
- Dielectric Phase-Correcting Structures for Electromagnetic Band Gap Resonator AntennasIEEE Transactions on Antennas and Propagation, 2015
- Highly efficient beam steering with a transparent metasurfaceOptics Express, 2013
- Metamaterials in electromagneticsMetamaterials, 2007
- Electromagnetic parameter retrieval from inhomogeneous metamaterialsPhysical Review E, 2005
- Robust method to retrieve the constitutive effective parameters of metamaterialsPhysical Review E, 2004
- Backward wave region and negative material parameters of a structure formed by lattices of wires and split-ring resonatorsIEEE Transactions on Antennas and Propagation, 2003
- Transmission properties and effective electromagnetic parameters of double negative metamaterialsOptics Express, 2003