Observation of surface cracks with scanning acoustic microscope
Authors:
- 1 February 1982
- journal article
- conference paper
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 53 (2) , 846-850
Abstract
Surface cracks introduced in soda lime glass and MgO single crystal have been examined with a 200- and 420-MHz scanning acoustic microscope. A fringe pattern was observed around the cracking line on the surface which could not be observed with an optical microscope. A simplified model is proposed in which fringe formation is due to the interference between the leaky surface wave reflected by the crack and the specularly reflected wave at the surface or the leaky surface wave that did not reach the crack. By monitoring these fringes, a Hertzian crack in soda lime glass with a depth as small as 25 μm was detected. The direction of crack orientation relative to the surface normal was also obtained from the asymmetrical contrast distribution of the fringes.Keywords
This publication has 10 references indexed in Scilit:
- Fringe pattern around surface crack observed with scanning acoustic microscopeElectronics Letters, 1981
- Film adhesion studies with the acoustic microscpeThin Solid Films, 1980
- Ultrasonic diffraction technique for characterization of fatigue cracksJournal of Nondestructive Evaluation, 1980
- Residual stress effects in sharp contact crackingJournal of Materials Science, 1979
- A model for predicting acoustic material signaturesApplied Physics Letters, 1979
- An angular-spectrum approach to contrast in reflection acoustic microscopyJournal of Applied Physics, 1978
- Equilibrium penny-like cracks in indentation fractureJournal of Materials Science, 1975
- Unified theory of Rayleigh-angle phenomena for acoustic beams at liquid-solid interfacesApplied Physics A, 1973
- Crack formation in magnesium oxide single crystalsPhilosophical Magazine, 1958
- Brittle Fractures near EquilibriumProceedings of the Physical Society. Section B, 1956