A homogenous solid polymer electrolyte prepared by facile spray drying method is used for room-temperature solid lithium metal batteries
- 13 July 2021
- journal article
- research article
- Published by Tsinghua University Press in Nano Research
- Vol. 16 (4) , 5080-5086
Abstract
The aggregation of inorganic particles with high mass ratio will form a heterogeneous electric field in the solid polymer electrolytes (SPEs), which is difficult to be compatible with lithium anode, leading to inadequate ionic conductivity. Herein, a facile spray drying method is adopted to increase the mass ratio of inorganic particles and solve the aggregation problems of fillers simultaneously. The polyvinylidene fluoride (PVDF) with lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) covers the surface of each Li6.4La3Zr1.4Ta0.6O12 (LLZTO) granules during the nebulization process, then forming flat solid electrolytes via layer-by-layer deposition. Characterized by the atomic force microscope, the obtained solid electrolytes achieve a homogenous dispersion of Young’s modulus and surface electric field. As a result, the as-prepared SPEs present high tensile strength of 7.1 MPa, high ionic conductivity of 1.86 × 10−4 S·cm−1 at room temperature, and wide electrochemical window up to 5.0 V, demonstrating increased mechanical strength and uniform lithium-ion migration channels for SPEs. Thanks to the as-prepared SPEs, the lithium-symmetrical cells show a highly stable Li plating/stripping cycling for over 1,000 h at 0.1 mA·cm−2. The corresponding Li/LCoO2 batteries also present good rate capability and excellent cyclic performance with capacity retention of 80% after 100 cycles at room temperature.Keywords
This publication has 52 references indexed in Scilit:
- High Ionic Conductivity of Composite Solid Polymer Electrolyte via In Situ Synthesis of Monodispersed SiO2 Nanospheres in Poly(ethylene oxide)Nano Letters, 2015
- All solid state lithium batteries based on lamellar garnet-type ceramic electrolytesJournal of Power Sources, 2015
- Densification and ionic-conduction improvement of lithium garnet solid electrolytes by flowing oxygen sinteringJournal of Power Sources, 2014
- Standardization of surface potential measurements of graphene domainsScientific Reports, 2013
- The mechanism of hydrogen-induced pitting corrosion in duplex stainless steel studied by SKPFMCorrosion Science, 2012
- Mapping of Local Electrical Properties in Epitaxial Graphene Using Electrostatic Force MicroscopyNano Letters, 2011
- Extremely High Silver Ionic Conductivity in Composites of Silver Halide (AgBr, AgI) and Mesoporous AluminaAdvanced Functional Materials, 2005
- Li6ALa2Ta2O12 (A = Sr, Ba): Novel Garnet‐Like Oxides for Fast Lithium Ion ConductionAdvanced Functional Materials, 2005
- The Impact of Elastic Deformation on Deposition Kinetics at Lithium/Polymer InterfacesJournal of the Electrochemical Society, 2005
- Dendritic growth mechanisms in lithium/polymer cellsJournal of Power Sources, 1999