Electromagnetically-Actuated Reciprocating Pump for High-Flow-Rate Microfluidic Applications
Open Access
- 26 September 2012
- Vol. 12 (10) , 13075-13087
Abstract
This study presents an electromagnetically-actuated reciprocating pump for high-flow-rate microfluidic applications. The pump comprises four major components, namely a lower glass plate containing a copper microcoil, a middle PMMA plate incorporating a PDMS diaphragm with a surface-mounted magnet, upper PMMA channel plates, and a ball-type check valve located at the channel inlet. When an AC current is passed through the microcoil, an alternating electromagnetic force is established between the coil and the magnet. The resulting bi-directional deflection of the PDMS diaphragm causes the check-valve to open and close; thereby creating a pumping effect. The experimental results show that a coil input current of 0.4 A generates an electromagnetic force of 47 mN and a diaphragm deflection of 108 μm. Given an actuating voltage of 3 V and a driving frequency of 15 Hz, the flow rate is found to be 13.2 mL/min under zero head pressure conditions.Keywords
This publication has 25 references indexed in Scilit:
- Design, analysis and optimization of an electromagnetic actuator for a micro impedance pumpJournal of Micromechanics and Microengineering, 2009
- MEMS-based micropumps in drug delivery and biomedical applicationsSensors and Actuators B: Chemical, 2008
- A MEMS-based valveless impedance pump utilizing electromagnetic actuationJournal of Micromechanics and Microengineering, 2008
- A programmable planar electroosmotic micropump for lab-on-a-chip applicationsJournal of Micromechanics and Microengineering, 2007
- Continuous dynamic flow micropumps for microfluid manipulationJournal of Micromechanics and Microengineering, 2007
- A microfluidic system utilizing molecularly imprinted polymer films for amperometric detection of morphineSensors and Actuators B: Chemical, 2007
- A stand-alone peristaltic micropump based on piezoelectric actuationBiomedical Microdevices, 2006
- Fabrication of a peristaltic PDMS micropumpSensors and Actuators A: Physical, 2005
- A magnetically driven PDMS micropump with ball check-valvesJournal of Micromechanics and Microengineering, 2005
- Micropumps—past, progress and future prospectsSensors and Actuators B: Chemical, 2005