Improving adhesion between thin chromium film and polyimide substrate by Ar+ irradiation

Authors:

Abstract
Ar+ irradiation and annealing at an elevated temperature are used to improve the adhesion of deposited Cr thin films by vacuum evaporation onto polyimide (PI) substrates. The Ar+ ions of 50 and 200 keV and various Ar+ doses ranging from 1 × 1013 to 2 × 1016 ions/cm2 are chosen for the experiments, after many preliminary trials. The surface analyses are conducted employing Rutherford Backscattering Spectroscopy (RBS), Fourier transform infrared spectrometry (FTIR), X‐ray photoelectron spectroscopy (XPS), and Scanning electron microscopy (SEM). Ar+ irradiation produces an interfacial layer of about 100 Å (10 nm) thick in which Cr particles and PI molecules are physically mixed and chemically bonded. The chemical bonds of CrO and a trace of CrC are observed by XPS and FTIR. Impact‐wear tests are also conducted in order to determine the effects of the Ar+ irradiation on the wear property of a Cr/PI system. A significant increase in the property is observed and the increase appears to be a function of the degree of adhesion of the Cr film to the PI substrate.

This publication has 22 references indexed in Scilit: