Direct Tensile Properties and Stress–Strain Model of UHP-ECC
- 1 January 2020
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 32 (1)
Abstract
This research developed an ultra-high-performance engineered cementitious composite (UHP-ECC), which combines the properties of strain-hardening, multiple cracking, and high mechanical strength. The compressive strength of the UHP-ECC reached 150 MPa at 28 days under standard curing conditions, whereas the tensile strength and strain capacity of the UHP-ECC were 18 MPa and 8%, respectively. Different fiber volumetric ratios and geometries (fiber length and diameter) were used to investigate the influences of fiber-reinforcement parameters on the mechanical and crack-pattern properties of UHP-ECC, including the tensile strength, strain capacity, strain energy, crack number, and crack spacing. It was found that the fiber reinforcement parameters significantly influence both the mechanical properties and crack-patterns of UHP-ECC. Based on the test results, a bilinear tensile stress–strain model was proposed for UHP-ECC and its accuracy was demonstrated through comparisons with the test results.Keywords
This publication has 39 references indexed in Scilit:
- Fatigue Deformation Model of Plain and Fiber-Reinforced Concrete Based on Weibull FunctionJournal of Structural Engineering, 2019
- Fatigue deformation behavior and fiber failure mechanism of ultra-high toughness cementitious composites in compressionMaterials & Design, 2018
- Structural behaviors of ultra-high performance engineered cementitious composites (UHP-ECC) beams subjected to bending-experimental studyConstruction and Building Materials, 2018
- Basic mechanical properties of ultra-high ductility cementitious composites: From 40 MPa to 120 MPaComposite Structures, 2018
- Strain hardening ultra-high performance concrete (SHUHPC) incorporating CNF-coated polyethylene fibersCement and Concrete Research, 2017
- Ultra-high-ductile behavior of a polyethylene fiber-reinforced alkali-activated slag-based compositeCement and Concrete Composites, 2016
- Evaluation of crack opening performance of a repair material with strain hardening behaviorCement and Concrete Composites, 2008
- Multiple Cracking Sequence and Saturation in Fiber Reinforced Cementitious CompositesConcrete Research and Technology, 1998
- Optimization of ultra-high-performance concrete by the use of a packing modelCement and Concrete Research, 1994
- Theory of multiple fracture of fibrous compositesJournal of Materials Science, 1973