The Effects of Piston Crevices and Injection Strategy on Low-Speed Pre-Ignition in Boosted SI Engines
Authors:
- 16 April 2012
- journal article
- Published by SAE International in SAE International Journal of Engines
- Vol. 05 (3) , 1216-1228
Abstract
The spark ignition (SI) engine has been known to exhibit several different abnormal combustion phenomena, such as knock or pre-ignition, which have been addressed with improved engine design or control schemes. However, in highly boosted SI engines, Low-Speed Pre-Ignition (LSPI), a pre-ignition event typically followed by heavy knock, has developed into a topic of major interest due to its potential for engine damage. Previous experiments associated increases in hydrocarbon emissions with the blowdown event of an LSPI cycle [1]. Also, the same experiments showed that there was a dependency of the LSPI activity on fuel and/or lubricant compositions [1]. Based on these findings it was hypothesized that accumulated hydrocarbons play a role in LSPI and are consumed during LSPI events. A potential source for accumulated HC is the top land piston crevice. Since the top land crevice is a quench zone, a series of experiments was undertaken to increase the clearance in the top land region to promote flame propagation into that region. The results indicate that increasing the size of the crevice volume reduced the incidence of LSPI significantly. Further experiments were conducted to determine the sensitivity of the effect of the shape and size of the crevice volume on the LSPI rate, yielding significant changes in the LSPI frequency. In addition to the piston hardware study, it was found that the LSPI behavior is strongly dependent on the mixture formation, particularly the injection strategy and type of injection system used (PFI versus GDI). It was hypothesized that by varying the amount of liquid fuel that impinges with the cylinder wall, the oil and fuel mixture is influenced, which in turn affects the top land accumulation rate as well as the release timing.Keywords
This publication has 9 references indexed in Scilit:
- Fundamental Approach to Investigate Pre-Ignition in Boosted SI EnginesSAE International Journal of Engines, 2011
- Engine Operating Condition and Gasoline Fuel Composition Effects on Low-Speed Pre-Ignition in High-Performance Spark Ignited Gasoline EnginesSAE International Journal of Engines, 2011
- Investigations on Pre-Ignition in Highly Supercharged SI EnginesSAE International Journal of Engines, 2010
- Development of Specific Tools for Analysis and Quantification of Pre-ignition in a Boosted SI EngineSAE International Journal of Engines, 2009
- Limits on downsizing in spark ignition engines due to pre-ignitionMTZ Worldwide, 2009
- Cooled EGR for a Turbo SI Engine to Reduce Knocking and Fuel ConsumptionSAE International Journal of Advances and Current Practices in Mobility, 2007
- Development and Application of an Improved Ring Pack Model for Hydrocarbon Emissions StudiesSAE International Journal of Advances and Current Practices in Mobility, 1996
- HC-Emissions of SI Engines - Optical Investigation of Flame Propagations in Piston Top Land CreviceSAE International Journal of Advances and Current Practices in Mobility, 1994
- Flow in the Piston-Cylinder-Ring Crevices of a Spark-Ignition Engine: Effect on Hydrocarbon Emissions, Efficiency and PowerSAE International Journal of Advances and Current Practices in Mobility, 1982