Numerical study on the slipstream and trackside pressure induced by trains with different longitudinal section lines
Authors:
- 6 December 2017
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit
- Vol. 232 (6) , 1671-1685
Abstract
Slipstreams are generated when high-speed trains pass through the open air causing safety threat to passengers, trackside workers and infrastructure. This study calculates the slipstream induced by trains with different longitudinal section lines using a detached-eddy simulation. The slipstream velocities and pressure at various lateral distances from the centre of the rail position and various vertical distances from the top of the rail position are calculated at a Reynolds number of 1.8 × 106, and the flow field around the trains is analysed. The results of the calculation are compared with the results of a full-scale test to validate the numerical method adopted in this work. The results demonstrate that the variations in the slipstream velocities induced by the four types of trains are similar as are the variations in the trackside pressures. The amplitudes of the slipstream velocities and trackside pressures are different due to the influence of the longitudinal section line, and both the slipstream velocity and the trackside pressure increase with the slope of the longitudinal section line. The slipstream velocity and trackside pressure decrease with increasing distance from the centre of the rail and the top of the rail. The large difference in the slipstream induced by the four types of trains occurs in regions where the distance from the centre of the rail is greater than 2.5 m and the distance from the top of the rail is greater than 1.5 m, and those regions are also the areas where platform passengers and track infrastructure are located. The results demonstrate that the slipstream in those regions can be reduced by adopting relatively lower slopes of the longitudinal section line.Keywords
This publication has 17 references indexed in Scilit:
- The effect of tail geometry on the slipstream and unsteady wake structure of high-speed trainsExperimental Thermal and Fluid Science, 2017
- Moving model analysis of the slipstream and wake of a high-speed trainJournal of Wind Engineering and Industrial Aerodynamics, 2015
- Wind tunnel analysis of the slipstream and wake of a high-speed trainJournal of Wind Engineering and Industrial Aerodynamics, 2014
- Detached-eddy simulation of the slipstream of an operational freight trainJournal of Wind Engineering and Industrial Aerodynamics, 2014
- Full-scale measurement and analysis of train slipstreams and wakes. Part 2 Gust analysisProceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2013
- Full-scale measurement and analysis of train slipstreams and wakes. Part 1: Ensemble averagesProceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2013
- The calculation of train slipstreams using large-eddy simulationProceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2012
- Passenger Train Slipstream Characterization Using a Rotating Rail RigJournal of Fluids Engineering, 2010
- LES of the Slipstream of a Rotating TrainJournal of Fluids Engineering, 2010
- LES study of the influence of the nose shape and yaw angles on flow structures around trainsJournal of Wind Engineering and Industrial Aerodynamics, 2010