Static mechanical properties of hydroxyapatite (HA) powder‐filled acrylic bone cements: Effect of type of HA powder
- 4 November 2004
- journal article
- research article
- Published by Wiley in Journal of Biomedical Materials Research Part B: Applied Biomaterials
- Vol. 72B (2) , 345-352
Abstract
This work reports on the effect of the amount (0, 10, and 30 wt %) and type of HA powder incorporated into an acrylic bone cement on the tensile properties, compression properties, and fracture toughness. The three different types of HA powders used were synthesized in the laboratory and coated with a silane agent prior to incorporation into the cement powder, and differed in particle size, water content, surface area, and crystallinity. It was found that the inclusion of any type of HA powder led to an increase in the tensile modulus (ET), but all the other mechanical properties of the cement decreased (relative to the values of the unfilled cement). The increase in ET is attributed to the good adhesion between the filler and the cement matrix, which is due to the silane coating agent. The decrease in the other mechanical properties may be a consequence of HA powder agglomeration and porosity. Hydroxyapatite morphology and crack‐growth mechanisms were analyzed by scanning electronic microscopy (SEM). © 2004 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 72B: 345–352, 2005Keywords
Funding Information
- University of Guadalajara
- Third World Academy of Sciences (TWAS) (00-213 RG/CHE/LA)
This publication has 19 references indexed in Scilit:
- Bone cements and fillers: A reviewJournal of Materials Science: Materials in Medicine, 2003
- Polymethylmethacrylate-based bone cement modified with hydroxyapatiteJournal of Biomedical Materials Research, 1999
- Effect of BaSO4 on the fatigue crack propagation rate of PMMA bone cementJournal of Biomedical Materials Research, 1996
- Flexural and fatigue properties of a bone cement based upon polyethylmethacrylate and hydroxyapatiteJournal of Materials Science: Materials in Medicine, 1995
- Studies of the mechanism by which the mechanical failure of polymethylmethacrylate leads to bone resorption.Journal of Bone and Joint Surgery, 1993
- Inorganic bone and demineralized bone matrix impregnated bone cement: A preliminary in vivo studyJournal of Biomedical Materials Research, 1993
- The initiation of failure in cemented femoral components of hip arthroplastiesThe Journal of Bone and Joint Surgery. British volume, 1991
- Bone‐particle‐impregnated bone cement: An in vivo weight‐bearing studyJournal of Biomedical Materials Research, 1991
- Bone‐particle‐impregnated bone cement: An in vitro studyJournal of Biomedical Materials Research, 1987
- Setting properties of bone cement with added synthetic hydroxyapatiteBiomaterials, 1985