Increased Stability of Low-Speed Turning Through a Distributed Force and Continuous Delay Model
- 24 August 2009
- journal article
- Published by ASME International in Journal of Computational and Nonlinear Dynamics
- Vol. 4 (4) , 041003
Abstract
This paper investigates the increased stability behavior commonly observed in low-speed machining. In the past, this improved stability has been attributed to the energy dissipated by the interference between the workpiece and the tool relief face. In this study, an alternative physical explanation is described. In contrast to the conventional approach, which uses a point force acting at the tool tip, the cutting forces are distributed over the tool-chip interface. This approximation results in a second-order delayed integrodifferential equation for the system that involves a short and a discrete delay. A method for determining the stability of the system for an exponential shape function is described, and temporal finite element analysis is used to chart the stability regions. Comparisons are then made between the stability charts of the point force and the distributed force models for continuous and interrupted turning.Keywords
This publication has 20 references indexed in Scilit:
- A comprehensive chatter prediction model for face turning operation including tool wear effectInternational Journal of Machine Tools and Manufacture, 2002
- Chatter stability of a slender cutting tool in turning with tool wear effectInternational Journal of Machine Tools and Manufacture, 1998
- On tool-chip interface stress distributions, ploughing force and size effect in machiningInternational Journal of Machine Tools and Manufacture, 1997
- Modeling of the process damping force in chatter vibrationInternational Journal of Machine Tools and Manufacture, 1995
- An analytical model of chatter vibration in metal cuttingInternational Journal of Machine Tools and Manufacture, 1994
- Improved Methods for the Prediction of Chatter in Turning, Part 2: Determination of Cutting Process ParametersJournal of Engineering for Industry, 1990
- Numerical simulation of non-linear chatter vibration in turningInternational Journal of Machine Tools and Manufacture, 1989
- On the Plastic Flow Beneath a Blunt Axisymmetric IndenterJournal of Engineering for Industry, 1970
- An Explanation of Low-Speed Chatter EffectsJournal of Engineering for Industry, 1969
- Theory of Self-Excited Machine-Tool Chatter: Contribution to Machine-Tool Chatter Research—1Journal of Engineering for Industry, 1965