Analysis of seismic pounding between adjacent buildings
Author:
- 2 September 2015
- journal article
- research article
- Published by Taylor & Francis in Australian Journal of Structural Engineering
- Vol. 16 (3) , 208-225
Abstract
Seismic poundings between inadequately separated buildings have been observed in most previous major earthquakes. Pounding usually caused local damage around the impacting areas, and in extreme cases, collapse of the building structures. AS1170.4-2007 requires the separation between adjacent buildings to be at least 1% of the building height to avoid seismic pounding. This article presents intensive numerical simulations to examine the adequacy of this specification to preclude seismic pounding between RC frame structures under design earthquake loading defined for Perth, and the effects of pounding, if it occurs, on structural responses. It is found that AS 1170.4-2007 in general provides a conservative approach for determining the required separation distances to avoid pounding. Intensive numerical simulations are also carried out to study the effects of pounding on structural responses. Two adjacent RC frame models of 5-storey and 10-storey with different separation gaps and fundamental period ratios are considered. Impact forces, displacements and shear forces of the two frame structures with or without pounding subjected to ground motions corresponding to different site conditions are calculated. The influences of seismic pounding on frame structures are discussed.Keywords
This publication has 31 references indexed in Scilit:
- Modelling and simulation of spatially varying earthquake ground motions at sites with varying conditionsProbabilistic Engineering Mechanics, 2012
- Pounding Damage to Buildings and Bridges in the 22 February 2011 Christchurch EarthquakeInternational Journal of Protective Structures, 2012
- Damage of Bridges due to the 2010 Maule, Chile, EarthquakeJournal of Earthquake Engineering, 2011
- Reconnaissance Report on Damage of Bridges in 2008 Wenchuan, China, EarthquakeJournal of Earthquake Engineering, 2009
- Analysis of Coupled Lateral-Torsional-Pounding Responses of One-Storey Asymmetric Adjacent Structures Subjected to Bi-Directional Ground Motions Part I: Uniform Ground Motion InputAdvances in Structural Engineering, 2005
- Analysis of Coupled Lateral-Torsional-Pounding Responses of One-Storey Asymmetric Adjacent Structures Subjected to Bi-Directional Ground Motions Part II: Spatially Varying Ground Motion InputAdvances in Structural Engineering, 2005
- Earthquake-induced interaction between adjacent reinforced concrete structures with non-equal heightsEarthquake Engineering & Structural Dynamics, 2004
- Modelling three‐dimensional non‐linear seismic performance of elevated bridges with emphasis on pounding of girdersEarthquake Engineering & Structural Dynamics, 2002
- ESTIMATION OF REQUIRED SEPARATIONS BETWEEN ADJACENT STRUCTURES UNDER SPATIAL GROUND MOTIONSJournal of Earthquake Engineering, 1998
- Earthquake simulator testing of pounding between adjacent buildingsEarthquake Engineering & Structural Dynamics, 1995