Galvanic Corrosion of Piping and Fitting Alloys in Sulfide-Modified Seawater
Author:
- 1 March 1980
- journal article
- Published by ASTM International in Journal of Testing and Evaluation
- Vol. 8 (2) , 74-79
Abstract
Two wrought piping alloys, 70-30 and 90-10 coppernickel, were each galvanically coupled to each of four fitting alloys in sulfide-modified seawater for 30 days. The fitting alloys used were bronze (Composition M), cast Monel®, wrought nickel-aluminum bronze, and cast 70-30 copper-nickel. The piping material to fitting material area ratio was 3:1 and the seawater velocity was 2.4 m/s. Results indicated that the galvanic relationship between M-bronze or Monel and 70-30 copper-nickel is affected by sulfide additions, in a manner that increases the corrosion of the fitting material, whereas similar couples with 90-10 copper-nickel show little effect of sulfide.Keywords
This publication has 12 references indexed in Scilit:
- Sulfide Induced Corrosion of Copper Nickel AlloysCorrosion, 1979
- Inhibition of Sulfide-Induced Corrosion of Copper-Nickel Alloys with Ferrous Sulfate1978
- Parametric Evaluation of Susceptibility of Cu-Ni Alloys to Sulfide Induced Corrosion1978
- Accelerated Corrosion of Copper-Nickel Alloys in Polluted Waters1976
- Corrosion of Condenser Tube Alloys in Sulfide Contaminated BrineCorrosion, 1975
- Role of Iron in the Inhibition of Corrosion of Marine Heat Exchangers — A ReviewBritish Corrosion Journal, 1972
- The protection of Cu by ferrous sulphate additionsCorrosion Science, 1968
- Reducing Condenser Tube Corrosion at Kincardine Generating Station with Ferrous SulphateProceedings of the Institution of Mechanical Engineers, 1964
- Reducing Corrosion of Power Plant Condenser Tubing With Ferrous SulfateCorrosion, 1961
- THE EXPERIMENTS MADE BY MR. UTHEMANN TO DISCOVER A PROCESS FOR PREVENTING THE CORROSION OF COPPER AND BRASS BY SEA‐WATER UNDER THE CONDITIONS FOUND IN THE SURFACE‐CONDENSERS OF MARINE STEAM‐ENGINESJournal of the American Society for Naval Engineers, 1907