Surface Modification of Spinel LiMn2O4 with Y2O3 for Lithium-Ion Battery
Authors:
- 1 December 2011
- journal article
- Published by Trans Tech Publications, Ltd. in Advanced Materials Research
- Vol. 391-392, 1069-1074
Abstract
Spinel LiMn2O4 was modified with Y2O3 coating by a chemical process. The crystal structures of the as-prepared samples were investigated by X-ray diffraction (XRD). The charge/discharge characteristics of the modified samples were evaluated at different rates between 3.0 and 4.4V. The discharge capacities of 2.0 wt.% Y2O3-coated LiMn2O4 are 116 mAh•g−1, 99.7mAh•g−1, 93.3mAh•g−1 and 82.9mAh•g−1 at 0.1C, 0.5C, 1C and 2C rates (at 20◦C). The cycle abilities improvement of the spinel LiMn2O4 coated with Y2O3 are demonstrated at elevated temperature (55◦C) and high rates (2C). From the analysis of electrochemical impedance spectroscopy (EIS), the improvement of cycle ability may be attributed to the suppression on the formation of the passivating films and the reduction of Mn dissolution, which result from the surface modification with Y2O3.Keywords
This publication has 15 references indexed in Scilit:
- Development of structural stability and the electrochemical performances of ‘La’ substituted spinel LiMn2O4 cathode materials for rechargeable lithium-ion batteriesSolid State Ionics, 2008
- Improvement of capacity fading resistance of LiMn2O4 by amphoteric oxidesJournal of Power Sources, 2008
- Electrochemical performance of SrF2-coated LiMn2O4 cathode material for Li-ion batteriesTransactions of Nonferrous Metals Society of China, 2007
- Increased cycling stability of AlPO4-coated LiMn2O4 for lithium ion batteriesMaterials Letters, 2007
- Surface modification by ZnO coating for improving the elevated temperature performance of LiMn2O4Journal of Alloys and Compounds, 2007
- Enhanced low voltage cycling stability of LiMn2O4 cathode by ZnO coating for lithium ion batteriesJournal of Alloys and Compounds, 2007
- Enhanced high-potential and elevated-temperature cycling stability of LiMn2O4 cathode by TiO2 modification for Li-ion batteryElectrochimica Acta, 2006
- Improving the elevated temperature performance of Li/LiMn2O4 cells by coating with ZnOJournal of Materials Science, 2005
- Effects of heteroatoms on electrochemical performance of electrode materials for lithium ion batteriesElectrochimica Acta, 2002
- Self‐Discharge of LiMn2 O 4/C Li‐Ion Cells in Their Discharged State: Understanding by Means of Three‐Electrode MeasurementsJournal of the Electrochemical Society, 1998