Limited angle BLDC for scan mirror application in space satellite system
- 28 June 2016
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Aerospace and Electronic Systems Magazine
- Vol. 31 (6) , 24-32
Abstract
Based on the analytical and simulation results, a prototype LABLT motor is fabricated using aerospace grade materials. A static test is conducted and a peak torque of 2.5 Nm is achieved for an armature current of 2 A with constant torque region of ±20° mechanical. Various position commands are issued at three rate inputs namely 1 deg/s, 2 deg/s, and 3 deg/s between ±20° and the results show a position accuracy of less than 0.32°. From the experimental investigations, the motor is found suitable for driving the scan mirror at three different rates and any six different positions within the constant torque region of ±20 deg mechanical. The motor is able to control and precisely position the scan mirror in the satellite mechanism. The requirement of the scan mechanism, to drive the scan mirror with a nominal torque of 2 Nm for ±20 deg mechanical at three different scan rates and six selectable scan positions is achieved.Keywords
This publication has 19 references indexed in Scilit:
- Speed control of BLDC motor drive under DTC scheme using OC with modified integrator2015
- Comparison of Cogging Torque Reduction in Permanent Magnet Brushless Machines by Conventional and Herringbone Skewing TechniquesIEEE Transactions on Energy Conversion, 2013
- Rotor Shape Optimization of Interior Permanent Magnet BLDC Motor According to Magnetization DirectionIEEE Transactions on Magnetics, 2013
- Torque Ripple Reduction in Brushless DC Drives Based on Reference Current Optimization Using Integral Variable Structure ControlIEEE Transactions on Industrial Electronics, 2013
- Compliant actuator designsIEEE Robotics & Automation Magazine, 2009
- Accurate tracking control of a limited angle torque motor2004
- Three-dimensional characteristic analysis of micro BLDC motor according to slotless winding shapeIEEE Transactions on Magnetics, 2003
- A new approach for minimum-torque-ripple maximum-efficiency control of BLDC motorIEEE Transactions on Industrial Electronics, 2000
- Design and fabrication of a high performance multilayer piezoelectric actuator with bending deformationIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 1999
- Finite element force calculation: comparison of methods for electric machinesIEEE Transactions on Magnetics, 1988