Novel combination of indicators to compare the corrosion behaviors of Al, Al–Li alloy 2A97, and other Al alloys
- 13 September 2021
- journal article
- research article
- Published by Wiley in Materials and Corrosion
- Vol. 73 (2) , 171-179
Abstract
Al–Li alloys have higher mechanical properties and are more lightweight than pure aluminum and other aluminum alloys. The element lithium is highly active; therefore, it is necessary to evaluate corrosion behaviors of Al–Li alloys. However, the existed methods and indicators that compare their corrosion properties are hard to characterize the continuous variations of corrosion performances with time. The potentiostatic polarization measurement is first proposed to compare corrosion resistances of Al, Al–Li alloy 2A97, and Al alloys 2024, 6061, 7050 in this study. Polarization current densities of these materials are measured. Then, equivalent resistances and charges amounts are respectively derived by Ohm's law and integration. Mass losses of these materials are calculated with Faraday's law. Measured current densities and three derived indicators above are applied to compare corrosion behaviors of these materials. Comparative results indicate that alloy 2A97 possesses the best corrosion property at the initial corrosion stage. During steady corrosion processes, the corrosion resistance of alloy 2A97 is better than those of alloys 2024, 6061, and Al except alloy 7050.Keywords
Funding Information
- National Natural Science Foundation of China (91860207)
This publication has 12 references indexed in Scilit:
- Microstructural evolution and its effect on mechanical properties of spray deposited 2195 alloy during porthole die extrusion processVacuum, 2019
- Comparative Studies on Degradation Behavior of Pure Zinc in Various Simulated Body FluidsJOM, 2019
- Qualitative use of potentiodynamic polarization and anodic hydrogen evolution in the assessment of corrosion susceptibility in AA2198‐T851 Al–Cu–Li alloyMaterials and Corrosion, 2018
- On the severe localized corrosion susceptibility of the AA2198-T851 alloyCorrosion Science, 2018
- Corrosion behaviour of 2A97-T6 Al-Cu-Li alloy: The influence of non-uniform precipitationCorrosion Science, 2018
- Environmentally assisted cracking resistance of Al–Cu–Li alloy AA2195 using slow strain rate test in 3.5% NaCl solutionTransactions of Nonferrous Metals Society of China, 2017
- Influence of Li addition to passivity behavior of pure Al in NaCl acidic solutionMaterials and Corrosion, 2016
- Continuous and discontinuous localized corrosion of a 2xxx aluminium–copper–lithium alloy in sodium chloride solutionJournal of Alloys and Compounds, 2016
- Mechanical properties degradation of (Al-Cu-Li) 2198 alloy due to corrosion exposureProcedia Structural Integrity, 2016
- SVET, SKP and EIS study of the corrosion behaviour of high strength Al and Al–Li alloys used in aircraft fabricationCorrosion Science, 2014