Application of pulse distribution analysis with optical emission spectroscopy (PDA/OES) method during production of duplex stainless steel
Authors:
- D. JanisDJD. Janis
- P. G. JönssonPJP. G. Jönsson
- A. AppellAAA. Appell
- J. JanisJJJ. Janis
- 7 February 2016
- journal article
- research article
- Published by SAGE Publications in Ironmaking & Steelmaking: Processes, Products and Applications
- Vol. 43 (2) , 121-129
Abstract
Liquid steel samples were taken during ladle treatment and continuous casting of 37 heats of two duplex stainless steel grades. These samples were used to study inclusion characteristics and potential process control using the pulse distribution analysis with optical emission spectroscopy method (PDA/OES). In addition, a few samples were chosen for a scanning electron microscope examination. A simplified approach of presenting the inclusion composition in ternary diagrams using the PDA/OES method is discussed. More specifically, by defining an operating window, potential deviations can be identified early in the steelmaking process. The variation of the B factor for Al (BAl) with process time was presented showing similar tendencies for several heats. For that reason, the B factor is considered to be a reliable parameter to study any process changes with respect to inclusion characteristics. Parameters such as BAl and the number of inclusions per unit volume larger than 4 μm obtained using the PDA/OES method showed a moderate correlation with a slivers index. Statistically, more data have to be collected for further studies. Nevertheless, the PDA/OES method is judged to be a promising tool to determine a slivers risk factor at an early stage of the process.Keywords
This publication has 10 references indexed in Scilit:
- Influence of ferroalloy impurities and ferroalloy addition sequence on ultra low carbon (ULC) steel cleanliness after RH treatmentIronmaking & Steelmaking: Processes, Products and Applications, 2012
- Inclusion characterisation for clean steelmaking and quality controlIronmaking & Steelmaking: Processes, Products and Applications, 2012
- State of the Art in Control of Inclusions, Their Characterization, and Future RequirementsMetallurgical and Materials Transactions B, 2012
- Distribution of Macroinclusions across Slab ThicknessISIJ International, 2012
- Methods for Assessment of Slab Centre Segregation as a Tool to Control Slab Continuous Casting with Soft ReductionISIJ International, 2006
- Influence of Sulphur Content and Molten Steel Flow on Entrapment of Bubbles to Solid/Liquid InterfaceISIJ International, 2006
- Consequent Improvement of Surface Quality by Systematic Analysis of SlabsSteel Research International, 2003
- Ideas for Process Control of Inclusion Characteristics During SteelmakingISIJ International, 2001
- A Metallurgical Tool for Rapid Determination of Micro Inclusion Characteristics in Bearingm Steel Production.ISIJ International, 1997
- Methods for assessment of cleanliness in superclean steels. Application to bearing steelsRevue de Métallurgie, 1996