Development of the hybrid distributed Bragg reflectors for mid-infrared applications
- 17 January 2024
- journal article
- research article
- Published by Polish Academy of Sciences Chancellery in Opto-Electronics Review
- Vol. 32 (1) , 149168
Abstract
In this study, an analysis of the optical performance of two types of distributed Bragg reflector structures based on GaAs and InP material systems was carried out. The structures were designed for maximum performance at 4 µm with their reflectivity achieving between 80 and 90% with eight pairs of constituent layers. To further enhance the performance of these structures, additional Au layers were added at the bottom of the structure with Ti pre-coating applied to improve the adhesivity of the Au to the semiconductor substrate. The optimal range of Ti layer thickness resulting in the improvement of the maximum reflectivity was determined to be in between 5 and 15 nm.Keywords
This publication has 38 references indexed in Scilit:
- Investigation of single-mode vertical-cavity surface-emitting lasers with graphene-bubble dielectric DBRPhotonics and Nanostructures - Fundamentals and Applications, 2018
- Influence of Ti and Cr Adhesion Layers on Ultrathin Au FilmsACS Applied Materials & Interfaces, 2017
- Room-temperature vertical-cavity surface-emitting lasers at 4 μm with GaSb-based type-II quantum wellsApplied Physics Letters, 2017
- Room-temperature mid-infrared interband cascade vertical-cavity surface-emitting lasersApplied Physics Letters, 2016
- Continuous wave vertical cavity surface emitting lasers at 2.5 μm with InP-based type-II quantum wellsApplied Physics Letters, 2015
- Detection of acetylene impurities in ethylene and polyethylene manufacturing processes using tunable diode laser spectroscopy in the 3-μm rangeApplied Physics B, 2011
- Emission wavelength tuning of interband cascade lasers in the 3–4 μm spectral rangeApplied Physics Letters, 2009
- Growth of InAs-containing quantum wells for InP-based VCSELs emitting at 2.3μmJournal of Crystal Growth, 2007
- A new Fourier transform photo‐modulation spectroscopic technique for narrow band‐gap materials in the mid‐ to far‐infra‐redPhysica Status Solidi (a), 2005
- Resonant-cavity-enhanced photodetectors and LEDs in the mid-infraredPhysica E: Low-dimensional Systems and Nanostructures, 2003