Synergistic Effect of Alloying on the Strength and Ductility of High Carbon Pearlitic Steel
Open Access
Abstract
In this work, the effects of the micro-alloying of Mn, Ni, and Si on the microstructure and mechanical properties of high-carbon pearlite steels were investigated. The results indicated that the addition of solely Ni to high-carbon pearlitic steel can enhance the strength through the refinement of interlamellar spacing, but work-hardening in the ferrite of the pearlite colony may be delayed, leading to a reduction in area. The multiple additions of Ni and the increase in Mn and Si contents in high-carbon pearlitic steel were beneficial to obtaining a balance between ultimate tensile strength and reduction in area. Three-dimensional atom probe tomography results showed Si partitioning into ferrite and Mn and Ni elements partitioning into cementite. The addition of Si inhibited the formation of a continuous network of grain-boundary cementite, leading to high strength and high ductility through optimization of the microstructure.Keywords
Funding Information
- National Natural Science Foundation of China (52071209)
This publication has 27 references indexed in Scilit:
- A Study of Structure Evolution in Pearlitic Steel Wire at Increasing Plastic DeformationSteel Research International, 2011
- Microstructure based modeling for the mechanical behavior of ferrite–pearlite steels suitable to capture isotropic and kinematic hardeningMaterials Science and Engineering: A, 2008
- Microstructure evolution in pearlitic steels during wire drawingActa Materialia, 2002
- Influence of Si on nano sub-structure of cementite lamellae in pearlitic steel wiresScripta Materialia, 1997
- Pearlite phase transformation in Si and V steelMetallurgical and Materials Transactions A, 1995
- Developments in ultra-high-carbon steels for wire rod production achieved through microalloying additionsMaterials & Design (1980-2015), 1993
- The effect of alloying elements and microstructure on the strength and fracture resistance of pearlitic steelMetallurgical Transactions A, 1988
- Microstructural effects on the cleavage fracture stress of fully pearlitic eutectoid steelMetallurgical Transactions A, 1986
- Partitioning of silicon during pearlite growth in a eutectoid steelActa Metallurgica, 1979
- The role of microstructure on the strength and toughness of fully pearlitic steelsMetallurgical Transactions A, 1976