Real-Time Assessment of Blasting Damage Depth Based on the Induced Vibration During Excavation of a High Rock Slope
- 1 November 2016
- journal article
- Published by ASTM International in Geotechnical Testing Journal
- Vol. 39 (6) , 991-1005
Abstract
Blasting is a major means for excavation of rock slope, and the blast-induced damage to reserved rock mass must be strictly limited to ensure safety of the high slope and reduce the cost for support. As a traditional and widely used technique, the sonic wave testing is usually adopted to detect the extents of blasting damage, but the workload of detecting is considerably heavy during excavation of large-scale rock slopes with a height of several hundred meters. Thus, a simple but efficient method of blasting damage assessment based on comprehensive vibration survey was presented in this paper. In total, 5 bench blasting experiments were conducted at the excavation site of the left dam-abutment slope of the Bai-he-tan Hydropower Station in southwestern China. A semi-empirical and semi-theoretical approach for predicting the blasting damage depth based on the Peak Particle Velocity (PPV) of blasting vibration at certain distance was established. The method was used to predict the damage depth of the subsequent bench blasting with monitored vibration, and the predicted results agreed well with those obtained by field damage testing, which indicated that the method proposed in this paper is reasonable and credible. Although there is no rigorous theoretical basis, this real-time damage assessing approach is simple and convenient to use, and it can significantly reduce the massive workload of sonic wave testing and greatly improve efficiency. The accuracy of damage assessment is heavily dependent on the engineering geological conditions of excavation site and the vibration monitoring quality. Thus, careful investigation of the engineering geological conditions before blasting excavation and field experiments are necessary for the application of this method.Keywords
This publication has 18 references indexed in Scilit:
- Comparison of Blast-Induced Damage Between Presplit and Smooth Blasting of High Rock SlopeRock Mechanics and Rock Engineering, 2013
- An introduction to Chinese safety regulations for blasting vibrationEnvironmental Earth Sciences, 2012
- Rock damage control in bedrock blasting excavation for a nuclear power plantInternational Journal of Rock Mechanics and Mining Sciences, 2011
- An investigation of the excavation damaged zone at the KAERI underground research tunnelTunnelling and Underground Space Technology, 2009
- The excavation damaged zone in clay formations time-dependent behaviour and influence on performance assessmentPhysics and Chemistry of the Earth, Parts A/B/C, 2007
- Real-time computerized tomography (CT) experiments on sandstone damage evolution during triaxial compression with chemical corrosionInternational Journal of Rock Mechanics and Mining Sciences, 2004
- The Lu-Hustrulid approach for calculating the peak particle velocity caused by blasting2003
- Behavior of Rock in SlopesJournal of Geotechnical and Geoenvironmental Engineering, 2000
- Seventeenth Canadian Geotechnical Colloquium: The effect of cohesion loss and stress path on brittle rock strengthCanadian Geotechnical Journal, 1997
- Controlled blasting in jointed rocksInternational Journal of Rock Mechanics and Mining Sciences, 1994