A Hardware-Efficient Feedback Polynomial Topology for DPD Linearization of Power Amplifiers: Theory and FPGA Validation
- 12 January 2018
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 65 (9) , 2889-2902
Abstract
This paper describes a hardware-efficient feedback polynomial topology for digital predistortion (DPD) linearization of power amplifiers. Unlike the existing pruned Volterra- series DPD linearization that compensates the nonlinearities in parallel, our topology tailors a feedback memory block, such that the nonlinearities and memory effects can be constructed separately, minimizing the running complexity while significantly reducing the size of the coefficients extractor. Yet, the coefficients of the feedback memory block cannot be extracted in the direct form. To surmount it, a design methodology is developed with the aid of complexity-reduced Volterra-series model. Also, it is known that the least square estimation can extract the coefficients of the digital predistorter, but its pseudo-inverse operation between the inputs and outputs involves heavy matrix multiplications and division. With a computational complexity of O(N³), the coefficients extractor could hardly be implemented efficiently in the field-programmable gate array (FPGA). Here, we propose a division-free line-searched-based recursive least square algorithm for adaptive linear and nonlinear coefficient estimation, relaxing the computational complexity to O(N) and supporting adaptive estimation in the FPGA. Our DPD experiments demonstrate both identification and predistortion procedures fully implemented in the FPGA. The measured error vector magnitude is reduced from 10.1% to <3.2%, and the adjacent channel leakage ratio (ACLR) is improved from -28.4 to -46.1 dBc, for a 20-MHz 64-QAM orthogonal frequency division multiplexing signal. For carrier-aggregation signals, the ACLR is improved from -35.8 to -45.3 dBc.Keywords
Funding Information
- Macao Science and Technology Development Fund–SKL Fund
- Universidade de Macau (MYRG2017-00223-AMSV)
This publication has 26 references indexed in Scilit:
- A Digital Predistortion System With Extended Correction Bandwidth With Application to LTE-A Nonlinear Power AmplifiersIEEE Transactions on Circuits and Systems I: Regular Papers, 2014
- FPGA Implementation of Adaptive Digital Predistorter With Fast Convergence Rate and Low Complexity for Multi-Channel TransmittersIEEE Transactions on Microwave Theory and Techniques, 2013
- A General Adaptive Digital Predistortion Architecture for Stand-Alone RF Power AmplifiersIEEE Transactions on Broadcasting, 2013
- On the Robustness of Look-Up Table Digital Predistortion in the Presence of Loop Delay ErrorIEEE Transactions on Circuits and Systems I: Regular Papers, 2012
- An Efficient Predistorter Design for Compensating Nonlinear Memory High Power AmplifiersIEEE Transactions on Broadcasting, 2011
- FPGA Implementation of a Real-Time NARMA-Based Digital Adaptive PredistorterIEEE Transactions on Circuits and Systems II: Express Briefs, 2011
- Low-Cost FPGA Implementation of Volterra Series-Based Digital Predistorter for RF Power AmplifiersIEEE Transactions on Microwave Theory and Techniques, 2010
- FPGA Realization of FIR Filters by Efficient and Flexible Systolization Using Distributed ArithmeticIEEE Transactions on Signal Processing, 2008
- A New Wideband Adaptive Digital Predistortion Technique Employing Feedback LinearizationIEEE Transactions on Microwave Theory and Techniques, 2008
- A new hardware realization of digital filtersIEEE Transactions on Acoustics, Speech, and Signal Processing, 1974