Effects of Mn Concentration on Grain Boundary Pinning of 5083 Aluminum Alloy
Open Access
- 1 January 2023
- journal article
- research article
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 26 (suppl 1) , e20220585
Abstract
Superplastic deformation has a significant industrial application value due to the large elongation, which allows manufacturing parts with complex geometries but happens at elevated temperatures and low strain rates. Therefore, it requires alloys with fine grain size but whose grains tend to grow at processing temperatures. Second-phase particles can promote grain boundary pinning to keep a fine grain size structure during superplastic forming. In 5083 aluminum alloy, Al6Mn particles make grain boundary pinning. There are two types of 5083 aluminum alloy: conventional with manganese range from 0.4 to 1.0 wt.% and superplastic with manganese between 0.64 and 0.86. It was observed in bibliographic research that the 5083 superplastic has a higher chemical concentration of manganese than the conventional one. However, no references were found covering manganese concentration in grain size stability. This work shows grain size evolution at a constant temperature of 5083 alloys with different manganese concentrations. This work indicates that the manganese substantially impacts grain boundary pinning when the chemical composition is between 0 and 0.6 wt.%. No significant effects were observed for Mn concentrations higher than 0.6%".Keywords
This publication has 11 references indexed in Scilit:
- Effect of Sc, Hf, and Yb Additions on Superplasticity of a Fine-Grained Al-0.4%Zr AlloyMetals, 2023
- Influence of fine scale features on room temperature superplastic behaviour of an ultrafine-grained Al-30Zn alloyMaterials Letters, 2019
- Finite Element Simulation of High-Speed Blow Forming of an Automotive ComponentMetals, 2018
- Superplasticity of Friction-Stir Welds of Zr-Modified 5083 Aluminum Alloy with Ultrafine-Grained StructureDefect and Diffusion Forum, 2018
- Control of second-phase particles in the Al-Mg-Mn alloy AA 5083Journal of Alloys and Compounds, 2016
- Recent Application of Superformed 5083 Aluminum Alloy in the Aerospace IndustryMaterials Science Forum, 2012
- Seventy-five years of superplasticity: historic developments and new opportunitiesJournal of Materials Science, 2009
- Thermodynamic Assessment of the Al-Mn and Mg-Al-Mn SystemsJournal of Phase Equilibria and Diffusion, 2008
- Superplasticity of 5083 alloys with Zr and Mn additions produced by reciprocating extrusionMaterials Science and Engineering: A, 2007
- Superplastic behavior of commercial aluminum bronzeScripta Metallurgica, 1985