Numerical study of ballistic impact of hard bulletproof vests: Effect of the multilayered armors design
Authors:
- 12 September 2023
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 44 (12) , 8496-8509
Abstract
Hard body Armors are often deployed in ballistic applications to enhance resistance to Armor Piercing projectiles (AP). The main challenge for body armor designers is to find a best compromise between strength and weight to ensure a given level of protection. This paper investigates the effect of layer arrangement order, ceramic layer thickness, composite backing layer thickness and impact velocity on body armor performance using a numerical experimental design. In addition, the influence of bullet diameter on target damage and bullet erosion is examined. A finite element model (FEM) is evolved through Abaqus explicit software to simulate the ballistic impact of an ogival‐nosed projectile against body armor composed of a ceramic forward layer and a composite rear layer. The results revealed that the layout of the ceramic layer on the front side, that is, directly in contact with the projectile, and the composite layer on the rear side provides better ballistic performance than the opposite case. Furthermore, it is found that the thickness of ceramic and composite plates has a considerable impact on the ballistic performance of body armor. The ceramic thickness has a greater influence on the residual velocity than the composite one. Moreover, the full penetration and nonpenetration zones of the projectile have been highlighted according to the thicknesses of the ceramic and composite layers and using two impact velocities. Highlights: Development of a numerical model simulating ballistic impact. Study the ceramic and composite thicknesses effect on ballistic performance. Analysis of target and projectile damage as a function of projectile diameter. Identification of full penetration and nonpenetration zones of the projectile.Keywords
This publication has 23 references indexed in Scilit:
- Numerical analysis of the ballistic behaviour of Kevlar® composite under impact of double-nosed stepped cylindrical projectilesJournal of Reinforced Plastics and Composites, 2015
- Numerical and experimental investigations into ballistic performance of hybrid fabric panelsComposites Part B: Engineering, 2014
- The effect of impact velocity and target thickness on ballistic performance of layered plates using Taguchi methodMaterials & Design (1980-2015), 2014
- Effect of projectile diameter on ballistic resistance and failure mechanism of single and layered aluminum platesTheoretical and Applied Fracture Mechanics, 2013
- Numerical simulation of ceramic composite armor subjected to ballistic impactComposites Part B: Engineering, 2010
- Influence of conical projectile diameter on perpendicular impact of thin steel plateEngineering Fracture Mechanics, 2008
- Ballistic impact behaviour of woven fabric composites: Parametric studiesMaterials Science and Engineering: A, 2005
- Perforation of 12mm thick steel plates by 20mm diameter projectiles with flat, hemispherical and conical nosesInternational Journal of Impact Engineering, 2002
- Analysis of ceramic/metal armour systemsInternational Journal of Impact Engineering, 2001
- Modelling of Fracture Processes in the Ballistic Impact on Ceramic ArmoursJournal de Physique IV, 1997