Development of Lamb Waves-Based SHM Systems
- 1 July 2012
- journal article
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 518, 87-94
Abstract
Guided waves (GW) based methods are a promising tool for structural health monitoring (SHM) of plate-like metallic and composite structures in which high safety standards are required. In this paper we present research with the aim to design and manufacture a prototype of Lamb waves (LW) SHM system. Two approaches can be applied for SHM of plate-like structures. One of them can be based on a sparse array and damage imaging involving incoherent summation of signals envelope. The second approach involves phased arrays with transducers spaced at a distance lower than half wavelength of the excited Lamb-mode. The influence of an arrays parameters on beamforming of Lamb waves is discussed in the case of linear array. It appears that an unequivocal localization of damage on a plate requires a 2D arrays topology; therefore a star-shaped active array was designed and manufactured for the developed SHM system. Two signal processing approaches were applied for that array, the standard one, based on the delay and sum (DAS) synthetic aperture focusing scheme, and the second one, using a self-focusing technique to obtain the separate images for each scatterer existing in the plate.Keywords
This publication has 13 references indexed in Scilit:
- Self-focusing Lamb waves based on the decomposition of the time-reversal operator using time–frequency representationMechanical Systems and Signal Processing, 2012
- Ultrasonic imaging algorithms with limited transmission cycles for rapid nondestructive evaluationIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2009
- Review of Guided-wave Structural Health MonitoringThe Shock and Vibration Digest, 2007
- Crack identification in aluminium plates using Lamb wave signals of a PZT sensor networkSmart Materials and Structures, 2006
- Ultrasonic nondestructive testing of scattering media using the decomposition of the time-reversal operatorIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2002
- Time-reversed acousticsReports on Progress in Physics, 2000
- Highly resolved detection and selective focusing in a waveguide using the D.O.R.T. methodThe Journal of the Acoustical Society of America, 1999
- Separation of interfering acoustic scattered signals using the invariants of the time-reversal operator. Application to Lamb waves characterizationThe Journal of the Acoustical Society of America, 1998
- Time-reversed Lamb wavesIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 1998
- Decomposition of the time reversal operator: Detection and selective focusing on two scatterersThe Journal of the Acoustical Society of America, 1996