Rheological and Rutting Characterization of Asphalt Mixes with Modified Binders
Authors:
- 1 January 2012
- journal article
- research article
- Published by ASTM International in Journal of Testing and Evaluation
- Vol. 40 (1) , 66-77
Abstract
This paper presents the results of investigations on the rheological properties of modified asphalt binders and their influence on the performance of asphalt mixes. Asphalt mixes with modified binders such as styrene butadiene styrene polymer, crumb rubber, natural rubber, and waste plastics were evaluated for their rheological properties and compared to the properties of asphalt mixes with unmodified VG30 (viscosity grade) asphalt binder. The dynamic modulus values and rutting characteristics of the asphalt mixes were studied with due consideration to different levels of aging and temperature variations. Studies on the rheological properties showed that the energy dissipated by unmodified asphalt (VG30) binder is higher than that of modified asphalt binders. Long-term aged natural rubber and waste plastic modified asphalt binders showed significant increase in the properties compared to unmodified asphalt binder (VG30). Reduced temperature susceptibility of polymer modified asphalt binder showed that only polymer modification can enhance both high temperature rutting resistance and low temperature thermal cracking resistance of asphalt mixes. The transient nature of polymer modified asphalt mix from viscoelastic solid-like to viscoelastic fluid-like condition is significantly shifted to higher temperature compared to that of the mix with unmodified asphalt binder. Aging and rutting indices showed that rubber modified asphalt mixes are highly susceptible to aging. Statistical analysis of test results showed that the process of modification of asphalt binder, aging, and temperature during the test influence the rheological and rutting characteristics of asphalt mixes significantly. Correlation between the asphalt binder properties and its influence on the rutting resistance are found to be statistically significant. The analysis using least significant difference showed that polymer modified asphalt binder significantly improves the aging and rutting resistance of asphalt mixes compared to unmodified asphalt binder.Keywords
This publication has 14 references indexed in Scilit:
- Steady shear properties of a class of aged bitumens2008
- Comparison of rutting resistance of unmodified and SBS-modified Superpave mixtures by accelerated pavement testingConstruction and Building Materials, 2008
- Investigation of rutting performance of asphalt mixtures containing polymer modifiersConstruction and Building Materials, 2007
- Rutting response of hot-mix asphalt to generalized dynamic shear moduli of asphalt binderConstruction and Building Materials, 2004
- Laboratory Evaluation of Crumb Rubber Modified Asphalt MixesJournal of Materials in Civil Engineering, 2004
- Asphalt Modified by Styrene-Butadiene-Styrene Triblock Copolymer: Morphology and ModelJournal of Materials in Civil Engineering, 2002
- Fatigue and Permanent Deformation Models for Polymer-Modified Asphalt MixturesTransportation Research Record: Journal of the Transportation Research Board, 2001
- Composite Asphalt Binders: Effect of Modified RPE on AsphaltJournal of Materials in Civil Engineering, 2000
- Polymer Modification of Arab AsphaltJournal of Materials in Civil Engineering, 1998
- Viscosity Characteristics of Rubber-Modified AsphaltsJournal of Materials in Civil Engineering, 1996