Thermal, mechanical, and barrier properties of polyethylene/surlyn/organoclay nanocomposites blown films prepared by different mixing methods
- 18 June 2014
- journal article
- research article
- Published by Wiley in Journal of Vinyl and Additive Technology
- Vol. 21 (1) , 60-69
Abstract
(Low‐density polyethylene) (LDPE)/clay nanocomposites were prepared by melt blending in a twin‐screw extruder by using different mixing methods. Zinc‐neutralized carboxylate ionomer was used as a compatibilizer. Blown films of the nanocomposites were then prepared. The effect of mixing method on the clay dispersion and properties of the nanocomposites was evaluated by wide‐angle X‐ray diffraction analysis, mechanical properties, thermal properties, and barrier properties. The structure and properties of nanocomposites containing different amounts of nanoclay prepared by selected mixing techniques were also investigated. It was found that melt compounding of Surlyn/clay masterbatch with pure LDPE and Surlyn (two‐step‐a method) results in better dispersion and intercalation of the nanofillers than melt mixing of LDPE/Surlyn/clay masterbatch with pure LDPE and surlyn (two‐step‐b method) and direct mixing of LDPE with clay. The films containing ionomer have good barrier properties. A wide‐angle X‐ray diffraction pattern indicates that intercalation of polymer chains into the clay galleries decreases by increasing the clay content. Barrier properties and tensile modulus of the films were improved by increasing the clay content. In addition, tensile strength increased in the machine direction, but it decreased in the transverse direction by increasing the clay content. DSC results showed that increasing the clay content does not show significant change in the melting and crystallization temperatures. The results of thermogravimetric analysis showed that the thermal stability of the nanocomposites decreased by increasing the clay content more than 1 wt%. J. VINYL ADDIT. TECHNOL., 21:60–69, 2015. © 2014 Society of Plastics EngineersKeywords
This publication has 28 references indexed in Scilit:
- Thermal properties and microhardness of HDPE/clay nanocomposites compatibilized by different functionalized polyethylenesPolymer Testing, 2009
- Preparation and UV weathering of polyethylene nanocompositesPolymer Bulletin, 2008
- Montmorillonite for clay-polymer nanocomposites: Intercalation of tailored compounds based on succinic anhydride, acid and acid salt derivatives—a reviewApplied Clay Science, 2007
- Effect of oxidized paraffin wax on the thermal and mechanical properties of linear low-density polyethylene–layered silicate nanocompositesPolymer Testing, 2007
- Development of new polyolefin films with nanoclays for application in food packagingEuropean Polymer Journal, 2007
- Influence of the intercalated cations on the surface energy of montmorillonites: Consequences for the morphology and gas barrier properties of polyethylene/montmorillonites nanocompositesJournal of Colloid and Interface Science, 2007
- Structure and dynamics of polyethylene/clay filmsJournal of Applied Polymer Science, 2006
- Effect of Ionomeric Compatibilizer on Clay Dispersion in Polyethylene/Clay NanocompositesMacromolecular Materials and Engineering, 2006
- Morphology and gas barrier properties of polyethylene‐based nanocompositesJournal of Polymer Science Part B: Polymer Physics, 2005
- Influence of clay exfoliation on the physical properties of montmorillonite/polyethylene compositesPolymer, 2002