Study on the Flame Transition Characteristics of a Gas Turbine Combustor
Open Access
- 26 April 2024
- journal article
- research article
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 12 (5) , 719
Abstract
Gas turbines are widely used as important equipment for electricity generation on islands and offshore platforms. During the operation of a gas turbine, the flame shape in the combustion chamber undergoes variations in response to changes in parameters such as gas turbine load, fuel distribution, and burner structure. These alterations in flame shape exert influence on combustion instability, emissions, and load characteristics. This study explores the variations in flame transition, emissions, and operating parameters among three distinct center stage structures: namely, the non-premix center stage (NPCS), premix center stage (PCS), and enhanced premix center stage (PCSE). The investigation is conducted using a heavy-duty gas turbine hybrid burner on a full temperature, full pressure, and full-size single burner experimental bench. Simultaneously, a multi-parameter numerical simulation regarding the influence of the central fuel split on flame shape analysis was conducted using the PCS burner under the design point for a more in-depth understanding of the mechanisms and for influencing factors associated with flame transition. The findings indicate that variations in flame transition loads among different central stage structures: for the NPCS burner, the transition occurs between 45% and 50% load; for the PCS burners, it takes place between 60% and 65% load; for the PCSE burners, it shifts between 55% and 60% load. Additionally, a reduction in NOx emissions is observed during the flame transition process. Furthermore, it was found that decreasing the central stage fuel results in a decline in flame angle for the same burner structure. As the central stage fuel diminishes to a specific value, the flame shape undergoes a sudden change. Further reduction in central stage fuel does not significantly affect the flame shape and temperature distribution.Keywords
Funding Information
- Natural Science Foundation of Heilongjiang Province (LH2020E067, 2019-III-0014-0058, J2019-III-0012-0055)
- National Science and Technology Major Project (LH2020E067, 2019-III-0014-0058, J2019-III-0012-0055)
- Hong Kong Scholars Program (LH2020E067, 2019-III-0014-0058, J2019-III-0012-0055)
This publication has 37 references indexed in Scilit:
- Natural gas-hydrogen hybrid combustion retrofit method and practice for F-class heavy-duty combustion enginesEngineering Research Express, 2023
- Electricity supply to offshore oil and gas platforms from renewable ocean wave energy: Overview and case study analysisEnergy Conversion and Management, 2019
- An overview on dry low NOx micromix combustor development for hydrogen-rich gas turbine applicationsInternational Journal of Hydrogen Energy, 2019
- Performance analysis of island energy system of SOFC and GT with gasified biomass fuelEnergy Procedia, 2019
- Development of a wide range-operable, rich-lean low-NOx combustor for NH3 fuel gas-turbine power generationProceedings of the Combustion Institute, 2019
- Review of Novel Combustion Techniques for Clean Power Production in Gas TurbinesEnergy & Fuels, 2018
- Review of modern low emissions combustion technologies for aero gas turbine enginesProgress in Aerospace Sciences, 2017
- Evaluation of future sustainable electricity generation alternatives: The case of a Greek islandRenewable and Sustainable Energy Reviews, 2017
- Combustion Regimes of a Jet Diffusion Flame in Hot Co-flowEnergy & Fuels, 2013
- Operation window and part-load performance study of a syngas fired gas turbineApplied Energy, 2012