Free Vibration of Orthotropic Skew Plates
Authors:
- 1 September 1999
- journal article
- Published by ASME International in Journal of Vibration and Acoustics
- Vol. 122 (3) , 313-317
Abstract
The main purpose of this paper is to develop a fast converging semianalytical method for assessing the vibration effect on thin orthotropic skew (or parallelogram/oblique) plates. Since the geometry of the skew plate is not helpful in the mathematical treatments, the analysis is often performed by more complicated and laborious methods. A successive conjunction of the Kantorovich method and the transition matrix is exploited herein to develop a new modification of the finite strip method to reduce the complexity of the problem. The displacement function is expressed as the product of a basic trigonometric series function in the longitudinal direction and an unknown function that has to be determined in the other direction. Using the new transition matrix, after necessary simplification and the satisfaction of the boundary conditions, yields a set of simultaneous equations that leads to the characteristic matrix of vibration. The influence of the skew angle, the aspect ratio, the properties of orthotropy, and the prescribed boundary conditions are investigated. Convergence of the solution is investigated and the accuracy of the results is compared with that available from other numerical methods. The numerical results show that the convergence is rapidly deduced and the comparisons agree very well with known results. [S0739-3717(00)00202-6]Keywords
This publication has 27 references indexed in Scilit:
- FREE VIBRATION OF SYMMETRICALLY LAMINATED SKEW PLATESJournal of Sound and Vibration, 1997
- FREE VIBRATIONS OF CLAMPED SYMMETRICALLY LAMINATED SKEW PLATESJournal of Sound and Vibration, 1996
- Application of the spline element method to analyse the bending of skew platesComputers & Structures, 1994
- Vibration studies on skew plates: Treatment of internal line supportsComputers & Structures, 1993
- The free vibration of skew plates using the hierarchical finite element methodComputers & Structures, 1992
- Vibration and buckling of skew plates with edges elastically restrained against rotationComputers & Structures, 1986
- A method for the determination of the fundamental frequency of orthotropic plates of polygonal boundary shapeJournal of Sound and Vibration, 1980
- TECHNICAL NOTE. FINITE STRIP METHOD OF ANALYSIS OF CLAMPED SKEW PLATES IN BENDING.Proceedings of the Institution of Civil Engineers, 1976
- Vibration of skew platesJournal of Sound and Vibration, 1973
- Frequency analysis of skew orthotropic plates by the finite strip methodJournal of Sound and Vibration, 1971