Advanced Nonaxisymmetric Endwall Contouring for Axial Compressors by Generating an Aerodynamic Separator—Part II: Experimental and Numerical Cascade Investigation
Authors:
- 27 October 2010
- journal article
- Published by Wiley in Journal of Turbomachinery
- Vol. 133 (2) , 021027
Abstract
Modern methods for axial compressor design are capable of shaping the blade surfaces in a three-dimensional way. Linking these methods with automated optimization techniques provides a major benefit to the design process. The application of nonaxisymmetric contoured endwalls is considered to be very successful in turbine rotors and vanes. Concerning axial compressors, nonaxisymmetric endwalls are still a field of research. This two-part paper presents the recent development of a novel endwall design. A vortex created by a nonaxisymmetric endwall groove acts as an aerodynamic separator, preventing the passage vortex from interacting with the suction side boundary layer. This major impact on the secondary flow results in a significant loss reduction by means of load redistribution, reduction in recirculation areas, and suppressed corner separation. Part I of this paper deals with the endwall design and its compressor application. The resulting flow phenomena and physics are described and analyzed in detail. The second paper presents the detailed experimental and numerical investigation of the developed endwall groove. The measurements carried out at the transonic cascade wind tunnel of DLR in Cologne, demonstrated a considerable influence on the cascade performance. A loss reduction and redistribution of the cascade loading were achieved at the aerodynamic design point, as well as near the stall condition of the cascade. This behavior is well predicted by the numerical simulation. The combined analysis of experimental and numerical flow patterns allows a detailed interpretation and description of the resulting flow phenomena. In this context, high fidelity 3D-Reynolds-averaged Navier–Stokes flow simulations are required to analyze the complex blade and endwall boundary layer interaction.Keywords
This publication has 19 references indexed in Scilit:
- Advanced Non-Axisymmetric Endwall Contouring for Axial Compressors by Generating an Aerodynamic Separator—Part I: Principal Cascade Design and Compressor Application2009
- Profiled End Wall Design Using an Adjoint Navier–Stokes SolverJournal of Turbomachinery, 2008
- Some Effects of Non-Axisymmetric End Wall Profiling on Axial Flow Compressor Aerodynamics: Part II—Multi-Stage HPC CFD Study2008
- Axis-Asymmetric Profiled Endwall Design by Using Multiobjective Optimisation Linked With 3D RANS-Flow-Simulations2007
- Three-Dimensional Separations in Axial CompressorsJournal of Turbomachinery, 2005
- Toward Excellence in Turbomachinery Computational Fluid Dynamics: A Hybrid Structured-Unstructured Reynolds-Averaged Navier-Stokes SolverJournal of Turbomachinery, 2005
- Performance of Strongly Bowed Stators in a Four-Stage High-Speed CompressorJournal of Turbomachinery, 2004
- Inlet Flow Angle Determination of Transonic Compressor CascadesJournal of Turbomachinery, 1992
- Wall Stall in Compressor CascadesJournal of Basic Engineering, 1966
- Recent Research on Cascade-Flow ProblemsJournal of Basic Engineering, 1966