Investigation on Rudder Hydrodynamics for 470 Class Yacht
Open Access
- 22 February 2018
- conference paper
- Published by MDPI AG in Proceedings
- Vol. 2 (6) , 308
Abstract
The rudder is an important appendage and used to adjust the course and balance the lateral displacement in the sailing regatta. RANSE (Reynolds-averaged Navier-Stokes Equations) was used to simulate the viscous flow field of the hull for 470 Class yacht based on CFD (Computational Fluid Dynamics). It is found that the stall angle was 30 degrees when the displacement is 280 kg and the boat speed is 2 m/s to 8 m/s. If the speed increases, the wake flow of the hull will influence the valid area of the rudder and span-chord ratio and the stall angle will be 35 degrees at the speed of 10 m/s. The lift-drag ratio will increase when the rudder angle is from 10 degrees to 25 degrees. The results would provide a theoretical reference for athletes to manipulate the sailboat.Keywords
This publication has 5 references indexed in Scilit:
- Turning ability analysis of a fully appended twin screw vessel by CFD. Part II: Single vs. twin rudder configurationOcean Engineering, 2016
- Numerical investigation on trimming of a single sail in a regattaSports Engineering, 2015
- Trim effect on the resistance of sailing planing hullsOcean Engineering, 2014
- The hydrodynamic flow around a yacht keel based on LES and DESOcean Engineering, 2012
- Mathematical models and numerical simulations for the America’s CupComputer Methods in Applied Mechanics and Engineering, 2005