Seismic Simulation of Inelastic Soils via Frequency-Dependent Moduli and Damping
Authors:
- 1 January 2002
- journal article
- Published by American Society of Civil Engineers (ASCE) in Journal of Engineering Mechanics
- Vol. 128 (1) , 34-47
Abstract
Although soils are known to exhibit nonlinear behavior even at small strains, evaluations of the response of sedimentary basins to strong seismic motions are almost always based on linear, elastic solutions incorporating frequency-independent damping. The principal reasons for this relate to the robustness of the linear algorithm and the ease with which the required parameters can be determined experimentally in engineering practice. Most often, but not always, attempts are made in these analyses to compensate for the inelastic behavior by adjusting the material parameters for the representative levels of strain by means of an iterative method. However, both the standard iterative method and the direct linear solution without iterations suffer from two important shortcomings. First, they do not account for the effect of high confining pressures on inelastic behavior. However, it is known from experiments with sands subjected to cyclic shearing strains under confining pressures of up to 5 Mpa, that in high...Keywords
This publication has 10 references indexed in Scilit:
- ErratumZoology, 2001
- Model for Dynamic Shear Modulus and Damping for Granular SoilsJournal of Geotechnical and Geoenvironmental Engineering, 2000
- Formulation of a unified constitutive model for clays and sandsInternational Journal for Numerical and Analytical Methods in Geomechanics, 1999
- Compression model for cohesionless soilsGéotechnique, 1995
- Frequency Domain Analysis of Undamped SystemsJournal of Engineering Mechanics, 1992
- Shear Modulus and Damping in Soils: Design Equations and CurvesJournal of the Soil Mechanics and Foundations Division, 1972
- Shear Modulus and Damping in Soils: Measurement and Parameter Effects (Terzaghi Leture)Journal of the Soil Mechanics and Foundations Division, 1972
- On a Class of Models for the Yielding Behavior of Continuous and Composite SystemsJournal of Applied Mechanics, 1967
- A Distributed-Element Model for Hysteresis and Its Steady-State Dynamic ResponseJournal of Applied Mechanics, 1966
- Modèles plasto-élastiquesRheologica Acta, 1958