Correction factor for determining mean velocity of shallow flow on rough surfaces under varying inundation conditions using dye tracer method
Authors:
- 27 January 2023
- journal article
- research article
- Published by Wiley in Earth Surface Processes and Landforms
- Vol. 48 (6) , 1219-1233
Abstract
Accurate estimation of mean flow velocity is crucial for hydraulics and soil erosion studies. A correction factor (α) is required to convert flow surface velocity to mean velocity when using the dye tracer method. However, the determination of an appropriate α value is challenging and little information is available about how α varies with progressive inundation conditions, especially for rough surfaces with protruding roughness elements (e.g., stones). Therefore, laboratory experiments were conducted in a flume with sandpaper (SD) and stones (ST) surfaces to investigate the impact of roughness elements on the correction factor with varying inundation conditions. The results showed that using a single α value is inappropriate for rough surfaces. The correction factor was positively correlated with the Reynolds number and is controlled by flow regimes as well. Moreover, the impacts of inundation conditions as well as protruding roughness elements should be taken into account for determining α. Correction factor varied non‐monotonically with inundation ratio, depending on the progressive inundation status of protruding roughness elements. The developed equations introducing the inundation ratio performed well in predicting α, with R2 = 0.86 and NSE = 0.91. The results contribute to our understanding of measuring mean flow velocity using the dye tracer method.Keywords
Funding Information
- Fundamental Research Funds for the Central Universities (2019ZY36)
- National Natural Science Foundation of China (41501292)
This publication has 61 references indexed in Scilit:
- High spatial resolution mapping of surface velocities and depths for shallow overland flowEarth Surface Processes and Landforms, 2012
- Correction factor to dye-measured flow velocity under varying water and sediment dischargesJournal of Hydrology, 2010
- Effects of macro‐scale bed roughness geometry on flow resistanceWater Resources Research, 2007
- Runoff hydraulic characteristics and sediment generation in sloped grassplots under simulated rainfall conditionsJournal of Hydrology, 2006
- Longitudinal velocity patterns and bed morphology interaction in a rillEarth Surface Processes and Landforms, 2004
- Modeling laminar sheet flow over rough surfacesWater Resources Research, 2002
- Hydraulics and erosion in eroding rillsWater Resources Research, 1997
- Macroscale surface roughness and frictional resistance in overland flowEarth Surface Processes and Landforms, 1997
- Effect of saltating sediment load on the determination of the mean velocity of overland flowWater Resources Research, 1997
- Hydraulics of interrill overland flow on stone-covered desert surfacesCATENA, 1994