Investigation of Flow Aerodynamics for Optimal Fuel Placement and Mixing in the Radial Swirler Slot of a Dry Low Emission Gas Turbine Combustion Chamber
- 3 November 2015
- journal article
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 138 (5) , 051505
Abstract
This paper is concerned with optimizing the fuel–air mixing processes that take place within the radial swirler slot of a dry low emission (DLE) combustion system. The aerodynamics of the flow within the slot is complex and this, together with the placement of the fuel holes with cross injection, controls the mixing of the fuel and air. Computational fluid dynamics (CFD) with the shear stress transport (SST) (k–) turbulence model was used for flow and mixing predictions within the radial swirler slot and for conducting a CFD-based design of experiments (DOE) optimization study, in which different parameters related to the fuel injection holes were varied. The optimization study was comprised of 25 orthogonal design configurations in the Taguchi L25 orthogonal array (OA). The test domain for the CFD, and its experimental validation, was a large-scale representation of a swirler slot from the Siemens proprietary DLE combustion system. The DOE study showed that the number of fuel holes, injection hole diameter, and interhole distance are the most influential parameters for determining optimal fuel mixing. Consequently, the optimized mixing configuration obtained from the above study was experimentally tested on an atmospheric test facility. The mixing patterns from experiments at various axial locations across the slot are in good agreement with the mixing predictions from the optimal CFD model. The optimized fuel injection design improved mixing compared with the baseline design by about 60%.
Keywords
This publication has 8 references indexed in Scilit:
- Mixing with Jets in Cross-FlowIndustrial & Engineering Chemistry Research, 2009
- Passive Scalar Mixing in Jets in Crossflow2006
- Experimental study on flame structure and temperature characteristics in a lean premixed model gas turbine combustorJournal of Mechanical Science and Technology, 2005
- Study of trajectories of jets in crossflow using direct numerical simulationsJournal of Fluid Mechanics, 2005
- Measurement of fuel mixing and transport processes in gas turbine combustionMeasurement Science and Technology, 2000
- Velocity measurements in the near field of a radial swirlerExperimental Thermal and Fluid Science, 1998
- Vortical structure in the wake of a transverse jetJournal of Fluid Mechanics, 1994
- Taguchi's Parameter Design: A Panel DiscussionTechnometrics, 1992