Investigation of Thermal Performance of Structural Insulated Panels for Northern Canada
Authors:
- 1 December 2015
- journal article
- Published by American Society of Civil Engineers (ASCE) in Journal of Architectural Engineering
- Vol. 21 (4)
Abstract
The thermal performance of structural insulated panels (SIP) and connections, developed and used to build 142 homes in Nunavut, Canada, was studied by subjecting the panels to steady-state cold climate conditions in a laboratory test setup. Testing was carried out using an inverted test hut, in which the panels were installed such that the interior of the hut was cooled down to outdoor conditions, and the ambient lab conditions served as the indoor climate. This inverted setup provides an alternative to using a large-scale environmental chamber when this is not available. Results showed the methodology used in this test is adequate to characterize the thermal performance at both the center of the panel and the connections. In carrying out steady-state thermal simulations on both the panel and connection cross sections using both one-dimensional (1D) and two-dimensional (2D) programs, it was found that while the 1D simulation could adequately predict the performance at the center of the panel, a 2D...Keywords
This publication has 18 references indexed in Scilit:
- Structural behavior and modeling of full-scale composite structural insulated wall panelsEngineering Structures, 2012
- Transient model for coupled heat, air and moisture transfer through multilayered porous mediaInternational Journal of Heat and Mass Transfer, 2010
- Experimental Assessment of Hygrothermal Properties of Wood-Frame Wall Assemblies—Moisture Content Calibration Curve for OSB Using Moisture PinsJournal of ASTM International, 2010
- Hygrothermal performance study of an innovative interior thermal insulation systemApplied Thermal Engineering, 2009
- Experimental Investigation of Hygrothermal Parameters of Building Materials Under Isothermal ConditionsJournal of Building Physics, 2009
- Chapter 5—Overview of Hygrothermal (HAM) Analysis Methods2008
- Development of regression equations for predicting energy and hygrothermal performance of buildingsEnergy and Buildings, 2008
- Hygrothermal calculations and laboratory tests on timber-framed wall structuresBuilding and Environment, 2003
- Thermal performance evaluation of a prefabricated fiber-reinforced plastic building envelope systemEnergy and Buildings, 1996
- Rectangular hybrid elements for the analysis of sandwich plate structuresCanadian Journal of Civil Engineering, 1987