HEAT TRANSFER IN TRICKLE-BED REACTORS
Authors:
- 1 November 1979
- journal article
- research article
- Published by Taylor & Francis in Chemical Engineering Communications
- Vol. 3 (6) , 483-499
Abstract
The mechanism of radial heat transfer in two-phase flow through packed beds is examined. A model with 2 parameters: an effective radial thermal conductivity in the bed, ke , and a heat transfer coefficient, hw , at the wall, give a satisfactory interpretation of the radial temperature profile. ke was expressed in terms of a stagnant contribution, due to the heat conduction through the solid and the fluid in the void space, and a radial mixing contribution of the gas and liquid phases, due to the radial component of the velocity of both fluids. The radial mixing contribution of the liquid ( ke ) L was compared with radial mass dispersion data, and a satisfactory agreement was obtained. Moreover, ( ke )was much higher than the gas mixing and the stagnant contributions. Correlations for hw and ke ) L have been proposed in accordance with the hydrodynamic regimes of the two-phase flow.Keywords
This publication has 6 references indexed in Scilit:
- Pressure drop and liquid holdup for two phase concurrent flow in packed bedsChemical Engineering Science, 1977
- Estimation of heat transfer parameters in a packed bedThe Chemical Engineering Journal, 1976
- Heat transfer in packed bedsChemical Engineering Science, 1972
- Liquid‐gas distribution measurements in the pulsing regime of two‐phase concurrent flow in packed bedsAIChE Journal, 1971
- Heat transfer characteristics of porous rocksAIChE Journal, 1960
- Studies on effective thermal conductivities in packed bedsAIChE Journal, 1957