Effect of acid–base reaction on the electrophoretic deposition of hydroxyapatite nanostructured coatings in isopropanol
- 16 July 2018
- journal article
- research article
- Published by IOP Publishing in Materials Research Express
- Vol. 5 (8) , 085024
Abstract
Suspensions of HA nanoparticles were prepared in isopropanol. Triethanolamine (TEA) was added along with acetic acid (AA) to enhance the zeta potential of particles. H+TEA ions generated by AA and TEA reaction were adsorbed on the particles and increased their zeta potential. The zeta potential increased to the maximum value at optimum concentration of AA (AA*) and then decreased with its further addition. AA* decreased with increasing the TEA content in suspension. Kinetics of EPD increased with AA addition into the TEA containing suspensions due to the increase in the zeta potential and reduction in voltage drop over the deposits. Detachment of particles from deposits into the suspensions was the fastest at AA* due to the highest electrochemical potential difference at the interface. Sticking parameter (f factor) was the minimum at AA*. The coating deposited at 60V for 15s from the suspension with TEA: 0.13 and AA*: 0.07Vol% (highest zeta potential) was selected as the optimum coating. Corrosion rate of substrate considerably decreased in simulated body fluid (SBF) at 37˚C as the optimum coating was applied on its surface. The apatite layer grew on the surface of optimum coating after its soaking in SBF at 37˚C for 1 week.Keywords
This publication has 47 references indexed in Scilit:
- Effect of triethanolamine on the electrophoretic deposition of hydroxyapatite nanoparticles in isopropanolCeramics International, 2013
- Stability of titania nano-particles in different alcoholsCeramics International, 2012
- Electrolytic deposition of magnesium-substituted hydroxyapatite crystals on titanium substrateMaterials Letters, 2009
- Electrodeposition of hydroxyapatite coating on AZ91D magnesium alloy for biomaterial applicationMaterials Letters, 2008
- Effect of suspension stability on electrophoretic deposition of hydroxyapatite coatingsMaterials Letters, 2006
- Preparation and Characterization of Hydroxyapatite Coatings on Ti6Al4V Alloy by a Sol‐Gel MethodJournal of the American Ceramic Society, 1999
- Hydroxyapatite Coating on a Collagen Membrane by a Biomimetic MethodJournal of the American Ceramic Society, 1998
- BioceramicsJournal of the American Ceramic Society, 1998
- Hydroxylapatite coating of porous implants improves bone ingrowth and interface attachment strengthJournal of Biomedical Materials Research, 1992
- Effect of hydroxyapatite impregnation on skeletal bonding of porous coated implantsJournal of Biomedical Materials Research, 1980