Bandstop Frequency-Selective Structures Based on Stepped-Impedance Loop Resonators: Design, Analysis, and Measurement
Authors:
- 9 November 2018
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 67 (2) , 1053-1064
Abstract
A new dual-polarized and dual-band second-order bandstop 3-D frequency-selective structure (FSS) is proposed with arbitrary band ratio. Compared with the square loop, the stepped-impedance loop resonator performs at a lower basic resonant frequency and increases the first spurious resonant frequency. Different half-wavelength stepped-impedance loop resonators are analyzed, compared and employed to design single /dual-band 3-D FSSs under TE polarization. A double-sided stepped-impedance loop resonator with via holes is presented for constructing a dual-polarized single-band FSS. By adjusting widths of low characteristic impedance sections, the FSS’s band can be expanded into dual bands. Detailed analysis of the coupling between both identical resonators in series is provided for understanding the relationships between sub-resonators. In addition, the equivalent circuit models are developed to explain the operating principle and analyze parameter effects. The proposed FSS prototype is fabricated and then measured to verify the design methodology. The measured results agree with the simulated data and exhibit a dual-polarized and stable second-order bandstop response under different incident angles up to 30°. The thickness of the structure is 23% of the free-space wavelength at the first center frequency, and the center frequency ratio of both stopbands is only 1.08.Keywords
This publication has 35 references indexed in Scilit:
- Dual-Band Bandpass Frequency-Selective Structures With Arbitrary Band RatiosIEEE Transactions on Antennas and Propagation, 2014
- A Miniaturized Dual-Band FSS With Stable Resonance Frequencies of 2.4 GHz/5 GHz for WLAN ApplicationsIEEE Antennas and Wireless Propagation Letters, 2014
- Microstrip stepped impedance resonator bandpass filter with an extended optimal rejection bandwidthIEEE Transactions on Microwave Theory and Techniques, 2003
- Dielectric frequency-selective structures incorporating waveguide gratingsIEEE Transactions on Microwave Theory and Techniques, 2000
- Geometrical structures and fundamental characteristics of microwave stepped-impedance resonatorsIEEE Transactions on Microwave Theory and Techniques, 1997
- Bandpass Filters Using Parallel Coupled Stripline Stepped Impedance ResonatorsIEEE Transactions on Microwave Theory and Techniques, 1980
- Equivalent Circuit Parameters of Microstrip Step Change in Width and Cross Junctions (Short Papers)IEEE Transactions on Microwave Theory and Techniques, 1976
- Calculation of Microstrip Discontinuity InductancesIEEE Transactions on Microwave Theory and Techniques, 1975
- Equivalent Capacitances for Microstrip Gaps and StepsIEEE Transactions on Microwave Theory and Techniques, 1972
- Matrix Methods for Microstrip Three-Dimensional ProblemsIEEE Transactions on Microwave Theory and Techniques, 1972