The study of Aluminum Nitride Isolation Layers in GeTe Phase-Change RF Switches

Authors:
  • WHWei He
    Wei He
  • HCHongwei Chen
    Hongwei Chen
  • TLTianpeng Liang
    Tianpeng Liang
  • JZJihua Zhang
    Jihua Zhang

Abstract
Aluminum nitride (AlN) thin films are widely used as isolation layers in phase-change switches. This study compares AlN films deposited by RF sputtering from a ceramic AlN target and by reactive sputtering from an Al target (Ar:N2 = 10:1). The reactively sputtered film yields an Al:N atomic ratio close to 1:1, whereas the ceramic-target film is N-rich. As-deposited, the reactively sputtered film exhibits an arithmetic average surface roughness (Ra) of 0.30 nm, compared with 0.64 nm for the ceramic-target film; after annealing at 900 °C, the reactively sputtered film remains smoother. Both films exhibit a single-crystalline orientation. After annealing, the ceramic-target film retains this orientation, while the reactively sputtered film exhibits multiple diffraction peaks. The device with reactively sputtered AlN shows an insertion loss of -0.48 dB @20 GHz (vs. -0.66 dB for the ceramic-target device) and an off-state isolation of 24.67 dB @20 GHz, superior to that of the ceramic-target counterpart, indicating better isolation performance. Furthermore, the reactively sputtered AlN device exhibits a lower off-state capacitance (Coff). Therefore, reactive sputtering from an Al target significantly improves the surface/interface quality and RF performance.

This publication has 19 references indexed in Scilit: