Analysis and Design of a Single-Stage Parallel AC-to-DC Converter
Authors:
- 11 August 2009
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 24 (12) , 2989-3002
Abstract
In this paper, a single-stage (S2) parallel ac-to-dc converter based on single-switch two-output boost-flyback converter is presented. The converter contains two semistages. One is the boost-flyback semistage, which transfers partial input power transferred to load directly through one power flow path and has excellent self-power factor correction property when operating in discontinuous conduction mode even though the boost output is close to the peak value of the line voltage. The other one is the flyback dc-to-dc (dc/dc) semistage that provides the output regulation on another parallel power flow path. With this design, the power conversion efficiency is improved and the current stress of control switch is reduced. Furthermore, the calculation process of power distribution and bulk capacitor voltage, design equations, and design procedure for key parameters are also presented. By following the procedure, an 80 W prototype converter has been built and tested. The experimental results show that the measured line harmonic current at the worst condition complies with the IEC61000-3-2 class D limits, the maximum bulk capacitor voltage is about 415.4 V, and the maximum efficiency is about 85.8%. Hence, the proposed S2 converter is suitable for universal input usage.Keywords
This publication has 19 references indexed in Scilit:
- New Power Factor Correction AC-DC Converter With Reduced Storage Capacitor VoltageIEEE Transactions on Industrial Electronics, 2007
- Input Impedance Analysis of Single-Phase PFC ConvertersIEEE Transactions on Power Electronics, 2005
- Single-Phase Single-Stage Power-Factor-Corrected Converter TopologiesIEEE Transactions on Industrial Electronics, 2005
- Single phase power factor correction: a surveyIEEE Transactions on Power Electronics, 2003
- A new family of single-stage isolated power-factor correctors with fast regulation of the output voltage2002
- Generalized topologies of single-stage input-current-shaping circuitsIEEE Transactions on Power Electronics, 2001
- A single-stage power-factor-correction converter with simple link voltage suppressing circuit (LVSC)IEEE Transactions on Industrial Electronics, 2001
- Improving dynamic response of power-factor preregulators by using two-input high-efficient postregulatorsIEEE Transactions on Power Electronics, 1997
- Fundamentals of Power Electronics1997
- Input filter design for power factor correction circuitsIEEE Transactions on Power Electronics, 1996