Experimental Study on Hybrid Cryogenic and Plasma-Enhanced Turning of 17-4PH Stainless Steel
- 16 October 2014
- journal article
- research article
- Published by Taylor & Francis in Materials and Manufacturing Processes
- Vol. 30 (7) , 868-874
Abstract
This article presents machinability of 17-4PH stainless steel using a hybrid technique composed of plasma-enhanced turning and cryogenic turning. First of all, using some primary experimental tests and nonlinear regression, a mathematical model was developed for surface temperature of uncut chip as a function of plasma current and cutting parameters. Then, the influence of cutting speed (Vc), feed (f), and surface temperature of uncut chip (Tsm) was studied on surface roughness (Ra), cutting force (Fz), and tool flank wear (VB). The results show that hybrid turning (HYT) is able to lower the main cutting force and tool flank wear in comparison with conventional turning. In addition, surface roughness was improved except for high level of surface temperature of uncut chip. However, hardness measurement of machined workpiece showed that HYT does not change the hardness of machined surface.Keywords
This publication has 22 references indexed in Scilit:
- Cutting Force and Surface Roughness Characterization in Cryogenic High-Speed End Milling of Ti–6Al-4V ELIMaterials and Manufacturing Processes, 2014
- Machining Performance of Cryogenically Treated Electrodes in Microelectric Discharge Machining: A Comparative Experimental StudyMaterials and Manufacturing Processes, 2013
- Performance Evaluation of Electrical Discharge Machining (EDM) Process Using Cryogenically Cooled ElectrodeMaterials and Manufacturing Processes, 2012
- Machining of AISI 316 Stainless Steel under Carbon-Di-Oxide CoolingMaterials and Manufacturing Processes, 2012
- Machining Efficiency Evaluation of Cryogenically Treated Copper Electrode in Additive Mixed EDMMaterials and Manufacturing Processes, 2012
- Flank Wear and Machining Performance of Cryogenically Treated Tungsten Carbide InsertsMaterials and Manufacturing Processes, 2011
- Cryogenic Turning of AISI 304 Stainless Steel with Modified Tungsten Carbide Tool InsertsMaterials and Manufacturing Processes, 2011
- The investigation on the prediction of tool wear and the determination of optimum cutting conditions in machining 17-4PH stainless steelJournal of Materials Processing Technology, 2003
- Tensile and fatigue properties of 17-4 PH stainless steel at high temperaturesMetallurgical and Materials Transactions A, 2002
- Cutting tool reliability analysis for variable feed milling of 17-4PH stainless steelWear, 1996