Thermoelectric Energy Harvesting for Exhaust Waste Heat Recovery: A System Design
- 7 January 2025
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (3) , 4904-4912
Abstract
Thermal energy harvesting for high-speed moving objects is particularly promising in providing an efficient and sustainable energy source to enhance operational capabilities and endurance. Thermoelectric (TE) technology, by exploiting temperature gradients between a heat source and ambient temperature, can provide a continuous power supply to such systems, reducing the reliance on conventional batteries and extending operation times. However, the integrated thermoelectric generator (TEG) system design research is far behind materials development. In this study, both experimental and numerical studies of TEG systems are designed and conducted to recover thermal energy. An integrated proof-of-concept platform is developed to simulate an exhaust gas emission system and demonstrate the designed TEG system performance. Triangular plate-fin heat exchangers are designed to collect heat from exhaust pipelines such as engine exhaust gas. While longitudinal trapezoidal fin cylindrical heatsink is designed for dissipating heat via forced convection, particularly for high-speed moving objects, the heatsink design is optimized using finite element analysis (FEA) simulations to maximize the temperature gradient and electrical output power. As a result, under a temperature gradient (ΔT) of 190 °C with commercial bismuth telluride-based TE modules, a maximum system output power of 40 W is achieved experimentally. Furthermore, a computational simulation is conducted to showcase the feasibility of the current system design under high-speed moving vehicle conditions. This study provides an advanced TEG system design bridging the TE device and integrated system transition and represents a potential advancement in the pursuit of high-speed moving objects such as autonomous and longer-lasting aerial platforms.Keywords
Funding Information
- Center for Energy Harvesting Materials and Systems
- Office of Naval Research Global (N00014-20-1-2602.)
- Army Research Laboratory (W911W6-19-C-0083)
This publication has 47 references indexed in Scilit:
- Toward High Conversion Efficiency of Thermoelectric Modules through Synergistical Optimization of Layered MaterialsAdvanced Materials, 2023
- Defect‐Engineering‐Stabilized AgSbTe2 with High Thermoelectric PerformanceAdvanced Materials, 2023
- Realizing High Energy Conversion Efficiency in a Novel Segmented‐Mg3(Sb, Bi)2/Cubic‐GeTe Thermoelectric Module for Power GenerationAdvanced Energy Materials, 2022
- Synergistic Effect of Band and Nanostructure Engineering on the Boosted Thermoelectric Performance of n‐Type Mg3+δ(Sb, Bi)2 ZintlsAdvanced Energy Materials, 2022
- Bismuth Telluride/Half‐Heusler Segmented Thermoelectric Unicouple Modules Provide 12% Conversion EfficiencyAdvanced Energy Materials, 2020
- Improvement of Low‐Temperature zT in a Mg3Sb2–Mg3Bi2 Solid Solution via Mg‐Vapor AnnealingAdvanced Materials, 2019
- Grain Boundary Engineering for Achieving High Thermoelectric Performance in n‐Type SkutteruditesAdvanced Energy Materials, 2017
- Isotropic Conduction Network and Defect Chemistry in Mg3+δSb2‐Based Layered Zintl Compounds with High Thermoelectric PerformanceAdvanced Materials, 2016
- Functional Graded Germanium–Lead Chalcogenide‐Based Thermoelectric Module for Renewable Energy ApplicationsAdvanced Energy Materials, 2015
- An Experimental Study of Heat Transfer During Forced Air ConvectionJournal of Materials Engineering and Performance, 2010