GaN HEMT Oscillators with Buffers
Open Access
- 28 July 2025
- journal article
- research article
- Published by MDPI AG in Micromachines
- Vol. 16 (8) , 869
Abstract
With their superior switching speed, GaN high-electron-mobility transistors (HEMTs) enable high power density, reduce energy losses, and increase power efficiency in a wide range of applications, such as power electronics, due to their high breakdown voltage. GaN-HEMT devices are subject to long-term reliability due to the self-heating effect and lattice mismatch between the SiC substrate and the GaN. Depletion-mode GaN HEMTs are utilized for radio frequency applications, and this work investigates three wide-bandgap (WBG) GaN HEMT fixed-frequency oscillators with output buffers. The first GaN-on-SiC HEMT oscillator consists of an HEMT amplifier with an LC feedback network. With the supply voltage of 0.8 V, the single-ended GaN oscillator can generate a signal at 8.85 GHz, and it also supplies output power of 2.4 dBm with a buffer supply of 3.0 V. At 1 MHz frequency offset from the carrier, the phase noise is −124.8 dBc/Hz, and the figure of merit (FOM) of the oscillator is −199.8 dBc/Hz. After the previous study, the hot-carrier stressed RF performance of the GaN oscillator is studied, and the oscillator was subject to a drain supply of 8 V for a stressing step time equal to 30 min and measured at the supply voltage of 0.8 V after the step operation for performance benchmark. Stress study indicates the power oscillator with buffer is a good structure for a reliable structure by operating the oscillator core at low supply and the buffer at high supply. The second balanced oscillator can generate a differential signal. The feedback filter consists of a left-handed transmission-line LC network by cascading three unit cells. At a 1 MHz frequency offset from the carrier of 3.818 GHz, the phase noise is −131.73 dBc/Hz, and the FOM of the 2nd oscillator is −188.4 dBc/Hz. High supply voltage operation shows phase noise degradation. The third GaN cross-coupled VCO uses 8-shaped inductors. The VCO uses a pair of drain inductors to improve the Q-factor of the LC tank, and it uses 8-shaped inductors for magnetic coupling noise suppression. At the VCO-core supply of 1.3 V and high buffer supply, the FOM at 6.397 GHz is −190.09 dBc/Hz. This work enhances the design techniques for reliable GaN HEMT oscillators and knowledge to design high-performance circuits.Keywords
This publication has 22 references indexed in Scilit:
- Low‐phase noise 8.22 GHz GaN HEMT oscillator using a feedback multi‐path transformerMicrowave and Optical Technology Letters, 2018
- An 4.7 GHz low‐power cross‐coupled GaN HEMT oscillatorMicrowave and Optical Technology Letters, 2018
- A Feedback GaN HEMT Oscillator2018
- A 1/f Noise Upconversion Reduction Technique for Voltage-Biased RF CMOS OscillatorsIEEE Journal of Solid-State Circuits, 2016
- Mode‐Switching Left‐Handed Standing Wave Voltage‐Controlled OscillatorMicrowave and Optical Technology Letters, 2013
- Fully‐integrated standing wave oscillator using composite right/left‐handed LC networkMicrowave and Optical Technology Letters, 2013
- Dual‐band VCO with composite right‐/left‐handed resonatorMicrowave and Optical Technology Letters, 2013
- A GaN differential oscillator with improved harmonic performanceIEEE Microwave and Wireless Components Letters, 2005
- High-power monolithic AlGaN/GaN HEMT oscillatorIEEE Journal of Solid-State Circuits, 2003
- Low flicker-noise GaN/AlGaN heterostructure field-effect transistors for microwave communicationsIEEE Transactions on Microwave Theory and Techniques, 1999