Influence of the Ductility Exponent on the Fatigue of Structural Steels
Open Access
Abstract
Fatigue models using the strain-life method do not show exact conformity with the empirical results. Therefore, the use of the mean-stress correction approach is to be evaluated, with a particular focus on mild and higher-strength steel. The influence of the ductility parameters will be studied. A potential favorable development of structural steels with regard to ductility will be checked. The paper will focus on two types of structural steel: S355 and S700. Initially, the mechanical properties of the steel test specimens were measured via a tensile testing rig. In addition, a fatigue test was carried out by applying various mean-stresses. Surface roughness was measured at the notch and introduced into the initial model. The strain amplitudes were determined using the Ramberg-Osgood and Masing material models. Subsequently, a curve fitting was applied to the strain-life data for the fatigue ductility exponent. The multiparameter model was fitted with only one parameter. The resulting model showed a good fit between the strain-life curve and the test results. During the course of the optimization, the error and the scatter were calculated separately for steel types S355 and S700. Based on the ductility exponent, a favorable behavior of the materials was determined.Keywords
This publication has 13 references indexed in Scilit:
- An improved strain-life model based on the Walker equation to describe tensile and compressive mean stress effectsInternational Journal of Fatigue, 2022
- Betriebsfestigkeit2020
- Consideration of imperfections and support effects in the fatigue assessment of welded cruciform jointsMaterials Testing, 2019
- Nachweis der Ermüdungsfestigkeit mittels KerbdehnungskonzeptStahlbau, 2019
- On the stability and sensitivity of the strain-life approach using the example of mild steelJournal of Constructional Steel Research, 2019
- On the estimation of cyclic material properties – Part 1: Quality of known estimation methodsMaterials Testing, 2018
- On the estimation of cyclic material properties – Part 2: Introduction of a new estimation methodMaterials Testing, 2018
- The strain-life approach applied to welded joints: Considering the real weld geometryJournal of Constructional Steel Research, 2018
- A comparison of the fatigue behavior between S355 and S690 steel gradesJournal of Constructional Steel Research, 2012
- A Course on Damage Mechanics1996