Effect of Flange Width-Thickness Ratio on Eccentrically Braced Frames Link Cyclic Rotation Capacity
Authors:
- 1 October 2005
- journal article
- Published by American Society of Civil Engineers (ASCE) in Journal of Structural Engineering
- Vol. 131 (10) , 1546-1552
Abstract
An analytical study was conducted to investigate the influence of the flange width–thickness ratio on the rotation capacity of links in eccentrically braced frames. Finite element models, verified using experimental data, were used to investigate the performance of 112 links. Models simulated strength degradation associated with flange and web local buckling that may occur during cyclic loading. The models provided data for short, intermediate, and long links with a range of flange width–thickness ratios. Results indicate that a relaxation of the flange width–thickness ratio requirement in current AISC seismic design provisions is justified. It was also found, however, that the provisions specify nonconservative design rotations for some intermediate links. This is shown to be related to web stiffener spacing and not the flange width–thickness ratio.Keywords
This publication has 8 references indexed in Scilit:
- Experimental Performance of Long Links in Eccentrically Braced FramesJournal of Structural Engineering, 1992
- Seismic analysis of links of various lengths in eccentrically braced framesCanadian Journal of Civil Engineering, 1991
- Composite Action in Eccentrically Braced FramesJournal of Structural Engineering, 1989
- Cyclic Web Buckling Control for Shear Link BeamsJournal of Structural Engineering, 1986
- General Behavior of WF Steel Shear Link BeamsJournal of Structural Engineering, 1986
- Shear Links in Eccentrically Braced FramesJournal of Structural Engineering, 1984
- Cyclic Behavior and Design of Link BeamsJournal of Structural Engineering, 1983
- Eccentrically Braced Steel Frames for EarthquakesJournal of the Structural Division, 1978