Effect of oxidation on mold compound-copper leadframe adhesion
Authors:
- S.C. VaheySVS.C. Vahey
- B.A. GillettBGB.A. Gillett
- 20 January 2003
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 77-82
Abstract
The effect of oxidation on adhesion between a mold compound and copper leadframe material was investigated for OCN and DCP molding compounds and one copper alloy. The oxidation temperatures selected were 175 and 200/spl deg/C and the bake times were varied between 5 minutes and 118 hours. Adhesion strength results obtained by the button shear test method indicated that the DCP mold compound-Cu adhesion was virtually unaffected by oxidation of the Cu at both 175 and 200/spl deg/C for exposure times up to 50 minutes. The adhesion in the case of the OCN mold compound was lower and exhibited a sharp decrease with increasing bake time at both temperatures. The degradation in adhesion strength was attributed primarily to the low cohesive strength of the copper oxide layer.Keywords
This publication has 6 references indexed in Scilit:
- An oxidation study of Cu leadframes2003
- Development of molding compounds suited for copper leadframes2002
- The role of plastic package adhesion in IC performance2002
- The oxidation control of copper leadframe package for prevention of popcorn cracking2002
- Relationship of adhesion, delamination, preconditioning and preplating effects at the plastic to leadframe interface2002
- The effect of the oxidation of Cu-base leadframe on the interface adhesion between Cu metal and epoxy molding compoundIEEE Transactions on Components, Packaging, and Manufacturing Technology: Part B, 1997