Dry Stone Masonry Walls in Bending—Part II: Analysis
- 2 October 2013
- journal article
- Published by Taylor & Francis in International Journal of Architectural Heritage
- Vol. 8 (1) , 29-48
Abstract
With the objective of developing analytical models for evaluation of the lateral strength of dry-stack masonry (DSM) walls subject to horizontal inertial loading, simple collapse mechanisms are proposed, which include a combination of out-of-plane flexural deformation along the main panel and in-plane shear deformation in the connecting return walls. The lateral strength is calculated using a virtual work approach incorporating moment capacities along different types of crack lines and shear resistance of in-plane panels participating in the mechanisms. The proposed treatment of the active in-plane panels assumes that they undergo frictional shear deformation (versus rigid body rocking), in consistency with the zero tensile strength nature of DSM. Allowance is also made for the presence of either restrained or unrestrained overburden loads at the top of the wall, which can generate either a strengthening or weakening effect, respectively. The accuracy of the analysis is assessed by comparing its predictions to the results of experimental tests on DSM reported in the companion study. These comparisons are favorable with respect to both the predicted values of strength and the critical failure mechanisms.Jaroslav Vaculik, Michael C. Griffith, and Guido MageneKeywords
This publication has 11 references indexed in Scilit:
- Dry Stone Masonry Walls in Bending—Part I: Static TestsInternational Journal of Architectural Heritage, 2013
- Lower and upper bounds in closed form for out-of-plane strength of masonry structures with frictional resistances2008
- 3D upper bound limit analysis of multi-leaf masonry wallsInternational Journal of Mechanical Sciences, 2008
- A kinematic FE limit analysis model for thick English bond masonry wallsInternational Journal of Solids and Structures, 2008
- 3D homogenized limit analysis of masonry buildings under horizontal loadsEngineering Structures, 2007
- A Reissner–Mindlin limit analysis model for out-of-plane loaded running bond masonry wallsInternational Journal of Solids and Structures, 2007
- Three-dimensional limit analysis of rigid blocks assemblages. Part II: Load-path following solution procedure and validationInternational Journal of Solids and Structures, 2005
- Three-dimensional limit analysis of rigid blocks assemblages. Part I: Torsion failure on frictional interfaces and limit analysis formulationInternational Journal of Solids and Structures, 2005
- Definition of Collapse Mechanisms and Seismic Vulnerability of Historic Masonry BuildingsEarthquake Spectra, 2003
- Computations on historic masonry structuresProgress in Structural Engineering and Materials, 2002