PARAMETER OPTIMIZATION AND EXPERIMENT OF SLIDER-HOLE-WHEEL SEED-METERING DEVICE BASED ON DISCRETE ELEMENT METHOD
Authors:
- 30 December 2021
- journal article
- research article
- Published by INMA Bucharest-Romania in INMATEH Agricultural Engineering
- Vol. 65 (3) , 410-420
Abstract
To improve the adaptability and precision of the slider-hole-wheel seed-metering device to meet the requirements of precision sowing, the single factor simulation experiments and the three factors three levels of orthogonal simulation experiments were carried out based on the discrete element method. The rotation speed of the seeding shaft, the shape of the hole, and the depth of the hole were set as experiment factors. The results of simulation experiments showed that the qualified rate was the highest when the rotation speed of the seeding shaft was 30 r/min, the shape of the hole was oval, and the depth of the hole was 9 mm. The qualified rate, replay rate, and miss-seeding rate were 89.09 %, 3.64 %, and 7.27 %,respectively. The hybrid rice seeds of Zhongnong 2008, Chuangliangyou 4418, and Gangyou 898 were chosen as the materials for the bench and field seeding performance tests to verify the reliability of the simulation results. The test results showed that the qualified rate of Zhongnong 2008, Chuangliangyou 4418, and Gangyou 898 seed in bench tests were 85.07 %, 85.20 %, and 82.13 %, and the qualified rate of Zhongnong 2008, Chuangliangyou 4418, and Gangyou 898 seed in field tests were 82.13 %, 82.27 %, and 80.53 %. The seeding performance with the three kinds of rice seeds could meet the agronomic requirements for precision sowing of hybrid rice. The paper provided the basis for the structure optimization and seeding performance improvement of the slider-hole-wheel seed-metering device.Keywords
This publication has 13 references indexed in Scilit:
- CONSTRUCTION OF A DISCRETE ELEMENT MODEL OF BUCKWHEAT SEEDS AND CALIBRATION OF PARAMETERSINMATEH Agricultural Engineering, 2021
- DESIGN AND TEST OF NEGATIVE PRESSURE CHAMBER ROTARY BUCKWHEAT SEED METERING DEVICEINMATEH Agricultural Engineering, 2021
- EXPERIMENT AND PARAMETERS OPTIMIZATION OF SEED DISTRIBUTOR OF MECHANICAL WHEAT SHOOTING SEED-METERING DEVICEINMATEH Agricultural Engineering, 2021
- ANALYSIS AND CALIBRATION OF QUINOA GRAIN PARAMETERS USED IN A DISCRETE ELEMENT METHOD BASED ON THE REPOSE ANGLE OF THE PARTICLE HEAPINMATEH Agricultural Engineering, 2020
- Double-Setting Seed-Metering Device for Precision Planting of Soybean at High SpeedsTransactions of the ASABE, 2019
- Review of precision rice hill-drop drilling technology and machine for paddyInternational Journal of Agricultural and Biological Engineering, 2018
- Design and key parameter optimization of an agitated soybean seed metering device with horizontal seed fillingInternational Journal of Agricultural and Biological Engineering, 2018
- Design of an active seed throwing and cleaning unit for pneumatic rice seed metering deviceInternational Journal of Agricultural and Biological Engineering, 2018
- Simulation of soya bean flow in mixed-flow dryers using DEMBiosystems Engineering, 2014
- Modeling the motion and orientation of various pharmaceutical tablet shapes in a film coating pan using DEMInternational Journal of Pharmaceutics, 2011