Numerical investigations of piston cooling using oil jet in heavy duty diesel engines
Authors:
- 1 October 2006
- journal article
- research article
- Published by SAGE Publications in International Journal of Engine Research
- Vol. 7 (5) , 411-421
Abstract
Thermal loading of diesel engine pistons has increased dramatically in recent years owing to applications of various technologies to meet low emission and high power density requirements. Control of piston temperatures by cooling of these pistons has become one of the determining factors in a successful engine design. The pistons are cooled by oil jets fired at the underside from the crankcase. Any excessive piston temperature rise may lead to engine seizure because of piston warping. However, if the temperature at the underside of the piston, where the oil jet strikes the piston, is above the boiling range of the oil being used, it may contribute to the generation of mist. This mist significantly contributes to the non-tailpipe emissions in the form of unburnt hydrocarbons (UBHCs). The problem of non-tailpipe emissions has unfortunately not been looked into so seriously, as the current stress of all automobile manufacturers is to meet the tailpipe emission legislative limits. A numerical model has been developed using finite element methods for studying the oil jet cooling of pistons and has been validated experimentally on a flat plate cooled by oil jet. Using numerical modelling, the heat transfer coefficient (h) at the underside of the piston is predicted. This predicted value of heat transfer coefficient significantly helps in selecting the correct oil type, oil jet velocity, oil jet diameter, and distance of oil nozzle from the underside of the piston. It also helps to predict whether the selected grade of oil will contribute to mist generation. Isotherms of the predicted temperature profiles in a production grade piston have been plotted.Keywords
This publication has 15 references indexed in Scilit:
- Numerical Investigations Of Piston Cooling Using Oil JetSAE International Journal of Advances and Current Practices in Mobility, 2004
- An impingement cooling on a flat surface by using circular jet with longitudinal swirling stripsInternational Journal of Heat and Mass Transfer, 2003
- Jet impingement cooling of a convex semi-cylindrical surfaceInternational Journal of Thermal Sciences, 2001
- An experimental comparison of liquid jet array and spray impingement cooling in the non-boiling regimeExperimental Thermal and Fluid Science, 1998
- Control of blowby emissions and lubricating oil consumption in I.C. enginesEnergy Conversion and Management, 1997
- The effect of inclination on local heat transfer under an axisymmetric, free liquid jetInternational Journal of Heat and Mass Transfer, 1991
- Local Heat Transfer Coefficients Under an Axisymmetric, Single-Phase Liquid JetJournal of Heat Transfer, 1991
- Heat transfer from round impinging jets to a flat plateInternational Journal of Heat and Mass Transfer, 1983
- Heat Transfer Characteristics of an Obliquely Impinging Circular JetJournal of Heat Transfer, 1980
- Heat and Mass Transfer between Impinging Gas Jets and Solid Surfaces1977