Infrared study on in situ polymerization of zinc dimethacrylate in poly(α‐octylene‐co‐ethylene) elastomer
- 5 May 2004
- journal article
- research article
- Published by Wiley in Polymer International
- Vol. 53 (6) , 802-808
Abstract
An infrared spectroscopic method was used to follow the course of in situ polymerization of zinc dimethacrylate (ZDMA) in poly(α‐octylene‐co‐ethylene) elastomer (POE). The integral intensity of the 831 cm−1 band, ie the out‐of‐plane deformation mode of CH, was used to determine the residual amount of ZDMA in composites cured at 165°C for different times, through which the course of in situ polymerization of ZDMA in POE was traced and the dynamic curve determined. The curing course of the ZDMA/POE/peroxide system at 165°C was examined with a rheometer and compared with the course of in situ polymerization. The results surprisingly show that the in situ polymerization of ZDMA is almost complete at the beginning stage of curing, and that substantial crosslinking starts subsequently. Scanning electron microscopy and transmission electron microscopy observations on morphologies of ZDMA/POE composites cured at 165°C for different times were carried out and confirmed the results of infrared experiments. Combining all the investigations, it was deduced that a competition exists between in situ polymerization and crosslinking in the composites. Covalent crosslinking rather than ionic bond crosslinks are the major types of crosslinks structures in ZDMA/POE composites, and its total density is lower than that of carbon‐ black‐reinforced POE. Copyright © 2004 Society of Chemical IndustryKeywords
This publication has 11 references indexed in Scilit:
- Simulation of the in situ copolymerization of zinc methacrylate and 2‐(N‐ethylperfluoro‐octanesulphonamido)ethyl acrylate in hydrogenated nitrile‐butadiene rubberPolymer International, 1999
- Influence of interfacial adhesion on toughening of polyethylene-octene elastomer/nylon 6 blendsJournal of Applied Polymer Science, 1998
- Deformation of Elastomeric Ethylene−Octene CopolymersMacromolecules, 1997
- Copolymerization of zinc methacrylate and perfluoroalkyl acrylate in hydrocarbon mediumJournal of Applied Polymer Science, 1996
- Polymerization Behavior of Zinc Methacrylate Study of Zinc Methacrylat/Rubber/Peroxide Compounds; Part 2.NIPPON GOMU KYOKAISHI, 1994
- Structural analysis of high strength HNBR/ZDMA composites.NIPPON GOMU KYOKAISHI, 1993
- Pattern Abrasion and Other Mechanisms of Wear of Tank Track PadsRubber Chemistry and Technology, 1992
- New Metallic Coagents for Curing ElastomersRubber Chemistry and Technology, 1991
- A new multiplet-cluster model for the morphology of random ionomersMacromolecules, 1990
- The Infra-red Spectra of Complex Molecules1975