Treatment of Wastewater from Thermal Desorption for Remediation of Oil-Contaminated Soil by the Combination of Multiple Processes
Open Access
- 18 October 2022
- journal article
- research article
- Published by Wiley in Journal of Chemistry
- Vol. 2022, 1-13
Abstract
Thermal desorption (TD) is one of the methods commonly used to remediate contaminated soil. However, as water is the liquid adsorbent of the off-gas treatment system in the TD stage, the wastewater generated after multiple cycles in the TD stage has low biodegradability and contains complex organic pollutants. In addition to petroleum hydrocarbon, there are also a lot of ammonia, emulsified oil, phenols, aldehydes, and ketones. In this study, effective removal of contaminants was achieved using a combined process of demulsification and flocculation (DF), ammonia stripping (AS), Fenton oxidation (FO), and reverse osmosis (RO). The combined process was optimized, and the maximum chemical oxygen demand (COD), NH3-N, turbidity, and extractable petroleum hydrocarbons (EPH) removal efficiencies reached 93.3, 79.8, 97.6, and 99.9, respectively. The FO was the key process for the efficient removal of contaminants. Ultraviolet-visible (UV/Vis), excitation-emission matrix (EEM), fluorescence spectroscopy, and gas chromatography-mass spectroscopy (GC-MS) showed that refractory macromolecular organic pollutants in water were removed, especially aromatics, phenols, and conjugated aldehydes or conjugated ketones, and further ring cleavage of benzene rings and carbocycles with carbon double bonds was observed. The cost-benefit analysis of the combined process was also carried out. The operating cost was 8.73 US$/m3, indicating that the combined process involved moderate costs for recalcitrant wastewater treatment. No studies have been published on combined processes for the treatment of wastewater from TD for the remediation of oil-contaminated soils. Therefore, this study could provide fundamental information based on experimental results and guidelines for wastewater treatment in engineering applications.Keywords
Funding Information
- National Basic Research Program of China (2018YFC1802100)
This publication has 47 references indexed in Scilit:
- Pretreatment of petrochemical wastewater by coagulation and flocculation and the sludge characteristicsJournal of Hazardous Materials, 2010
- Study of different pretreatments for reverse osmosis reclamation of a petrochemical secondary effluentJournal of Hazardous Materials, 2010
- Comparative study between chemical coagulation/precipitation (C/P) versus coagulation/dissolved air flotation (C/DAF) for pre-treatment of personal care products (PCPs) wastewaterDesalination, 2010
- PARAFAC and MCR-ALS applied to the quantitative monitoring of the photodegradation process of polycyclic aromatic hydrocarbons using three-dimensional excitation emission fluorescent spectraComparative results with HPLCTalanta, 2007
- Influence of processing parameters and membrane type on permeate flux during solution concentration of different alcohols, esters, and aldehydes by reverse osmosisJournal of Food Engineering, 2007
- Advanced Oxidation Processes for Organic Contaminant Destruction Based on the Fenton Reaction and Related ChemistryCritical Reviews in Environmental Science and Technology, 2006
- Flocculation-dispersion characteristics of alumina using a wide molecular weight range of polyacrylic acidsColloids and Surfaces A: Physicochemical and Engineering Aspects, 2003
- Study on feed pretreatment for membrane filtration of secondary effluentSeparation and Purification Technology, 2002
- Benefit‐cost estimation for alternative drinking water maximum contaminant levelsWater Resources Research, 2001
- Aqueous Ammonia Equilibrium Calculations: Effect of pH and TemperatureJournal of the Fisheries Research Board of Canada, 1975